On Thu, Sep 20, 2018 at 04:50:48PM +0800, Jianxin Pan wrote:
> From: Liang Yang <[email protected]>
>
> Add Amlogic NAND controller dt-bindings for Meson SoC,
> Current this driver support GXBB/GXL/AXG platform.
>
> Signed-off-by: Liang Yang <[email protected]>
> Signed-off-by: Yixun Lan <[email protected]>
> ---
> .../devicetree/bindings/mtd/amlogic,meson-nand.txt | 60
> ++++++++++++++++++++++
> 1 file changed, 60 insertions(+)
> create mode 100644
> Documentation/devicetree/bindings/mtd/amlogic,meson-nand.txt
>
> diff --git a/Documentation/devicetree/bindings/mtd/amlogic,meson-nand.txt
> b/Documentation/devicetree/bindings/mtd/amlogic,meson-nand.txt
> new file mode 100644
> index 0000000..803df2a
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/mtd/amlogic,meson-nand.txt
> @@ -0,0 +1,60 @@
> +Amlogic NAND Flash Controller (NFC) for GXBB/GXL/AXG family SoCs
> +
> +This file documents the properties in addition to those available in
> +the MTD NAND bindings.
> +
> +Required properties:
> +- compatible : contains one of:
> + - "amlogic,meson-gxl-nfc"
> + - "amlogic,meson-axg-nfc"
> +- clocks :
> + A list of phandle + clock-specifier pairs for the clocks listed
> + in clock-names.
> +
> +- clock-names: Should contain the following:
> + "core" - NFC module gate clock
> + "device" - device clock from eMMC sub clock controller
> +
> +- amlogic,mmc-syscon : Required for NAND clocks, it's shared with SD/eMMC
> + controller port C
> +
> +Optional children nodes:
> +Children nodes represent the available nand chips.
> +
> +Other properties:
> +see Documentation/devicetree/bindings/mtd/nand.txt for generic bindings.
> +
> +Example demonstrate on AXG SoC:
> +
> + sd_emmc_c_clkc: mmc@7000 {
> + compatible = "amlogic,meson-axg-mmc-clkc", "syscon";
> + reg = <0x0 0x7000 0x0 0x800>;
> + status = "okay";
> + };
> +
> + nand: nfc@7800 {
nand-controller@7800
> + compatible = "amlogic,meson-axg-nfc";
> + reg = <0x0 0x7800 0x0 0x100>;
> + #address-cells = <1>;
> + #size-cells = <0>;
> + interrupts = <GIC_SPI 34 IRQ_TYPE_EDGE_RISING>;
> + status = "disabled";
> +
> + clocks = <&clkc CLKID_SD_EMMC_C>,
> + <&sd_emmc_c_clkc CLKID_MMC_DIV>;
> + clock-names = "core", "device";
> + amlogic,mmc-syscon = <&sd_emmc_c_clkc>;
> +
> + status = "okay";
Don't show status in examples, plus you have it twice.
> +
> + pinctrl-names = "default";
> + pinctrl-0 = <&nand_pins>;
> +
> + nand@0 {
> + reg = <0>;
> + #address-cells = <1>;
> + #size-cells = <1>;
> +
> + nand-on-flash-bbt;
> + };
> + };
> --
> 1.9.1
>
