Hi Vignesh, > -----Original Message----- > From: Vignesh R [mailto:[email protected]] > Sent: Wednesday, October 3, 2018 10:26 PM > To: Boris Brezillon <[email protected]>; Marek Vasut > <[email protected]>; Rob Herring <[email protected]> > Cc: Brian Norris <[email protected]>; Yogesh Narayan Gaur > <[email protected]>; Linux ARM Mailing List <linux-arm- > [email protected]>; [email protected]; > [email protected]; [email protected]; Vignesh R > <[email protected]> > Subject: [PATCH 1/3] mtd: spi-nor: Add Octal mode support for mt35xu512aba > > Micron's mt35xu512aba flash is an Octal flash that has x8 IO lines. It > supports > read/write over 8 IO lines simulatenously. Add support for Octal read mode for > Micron mt35xu512aba. > Unfortunately, this flash is only complaint to SFDP JESD216B and does not seem > to support newer JESD216C standard that provides auto detection of Octal > mode capabilities and opcodes. Therefore, this capability is manually added > using new SPI_NOR_OCTAL_READ flag. >
Thanks for sending the patch-set of adding octal support. If possible, can you share the MT35x datasheet? I also have the patch ready in which I have added support for Read (1-1-8 and 1-8-8) protocol and Write (1-1-8 and 1-8-8). Also have added support of Octal in driver/spi/spi.c framework. IMO, we would collaborate our patches. -- Regards Yogesh Gaur > Signed-off-by: Vignesh R <[email protected]> > --- > drivers/mtd/spi-nor/spi-nor.c | 11 ++++++++++- > include/linux/mtd/spi-nor.h | 2 ++ > 2 files changed, 12 insertions(+), 1 deletion(-) > > diff --git a/drivers/mtd/spi-nor/spi-nor.c b/drivers/mtd/spi-nor/spi-nor.c > index > aff5e6ff0b2c..4926e805a8cb 100644 > --- a/drivers/mtd/spi-nor/spi-nor.c > +++ b/drivers/mtd/spi-nor/spi-nor.c > @@ -90,6 +90,7 @@ struct flash_info { > #define NO_CHIP_ERASE BIT(12) /* Chip does not support chip > erase */ > #define SPI_NOR_SKIP_SFDP BIT(13) /* Skip parsing of SFDP tables */ > #define USE_CLSR BIT(14) /* use CLSR command */ > +#define SPI_NOR_OCTAL_READ BIT(15) /* Flash supports Octal Read */ > > int (*quad_enable)(struct spi_nor *nor); > }; > @@ -209,6 +210,7 @@ static inline u8 spi_nor_convert_3to4_read(u8 opcode) > { SPINOR_OP_READ_1_2_2, SPINOR_OP_READ_1_2_2_4B }, > { SPINOR_OP_READ_1_1_4, SPINOR_OP_READ_1_1_4_4B }, > { SPINOR_OP_READ_1_4_4, SPINOR_OP_READ_1_4_4_4B }, > + { SPINOR_OP_READ_1_1_8, SPINOR_OP_READ_1_1_8_4B }, > > { SPINOR_OP_READ_1_1_1_DTR, > SPINOR_OP_READ_1_1_1_DTR_4B }, > { SPINOR_OP_READ_1_2_2_DTR, > SPINOR_OP_READ_1_2_2_DTR_4B }, > @@ -1406,7 +1408,7 @@ static const struct flash_info spi_nor_ids[] = { > { "mt25qu02g", INFO(0x20bb22, 0, 64 * 1024, 4096, SECT_4K | > USE_FSR | SPI_NOR_QUAD_READ | NO_CHIP_ERASE) }, > > /* Micron */ > - { "mt35xu512aba", INFO(0x2c5b1a, 0, 128 * 1024, 512, SECT_4K | > USE_FSR | SPI_NOR_4B_OPCODES) }, > + { "mt35xu512aba", INFO(0x2c5b1a, 0, 128 * 1024, 512, SECT_4K | > USE_FSR > +| SPI_NOR_OCTAL_READ | SPI_NOR_4B_OPCODES) }, > > /* PMC */ > { "pm25lv512", INFO(0, 0, 32 * 1024, 2, SECT_4K_PMC) }, > @@ -3199,6 +3201,13 @@ static int spi_nor_init_params(struct spi_nor *nor, > SNOR_PROTO_1_1_4); > } > > + if (info->flags & SPI_NOR_OCTAL_READ) { > + params->hwcaps.mask |= SNOR_HWCAPS_READ_1_1_8; > + spi_nor_set_read_settings(¶ms- > >reads[SNOR_CMD_READ_1_1_8], > + 0, 8, SPINOR_OP_READ_1_1_8, > + SNOR_PROTO_1_1_8); > + } > + > /* Page Program settings. */ > params->hwcaps.mask |= SNOR_HWCAPS_PP; > spi_nor_set_pp_settings(¶ms->page_programs[SNOR_CMD_PP], > diff --git a/include/linux/mtd/spi-nor.h b/include/linux/mtd/spi-nor.h index > 8b1acf68b7ac..ae9861ed7e0f 100644 > --- a/include/linux/mtd/spi-nor.h > +++ b/include/linux/mtd/spi-nor.h > @@ -50,6 +50,7 @@ > #define SPINOR_OP_READ_1_2_2 0xbb /* Read data bytes (Dual I/O > SPI) */ > #define SPINOR_OP_READ_1_1_4 0x6b /* Read data bytes (Quad > Output SPI) */ > #define SPINOR_OP_READ_1_4_4 0xeb /* Read data bytes (Quad I/O > SPI) */ > +#define SPINOR_OP_READ_1_1_8 0x8b /* Read data bytes (Octal > Output SPI) */ > #define SPINOR_OP_PP 0x02 /* Page program (up to 256 bytes) */ > #define SPINOR_OP_PP_1_1_4 0x32 /* Quad page program */ > #define SPINOR_OP_PP_1_4_4 0x38 /* Quad page program */ > @@ -73,6 +74,7 @@ > #define SPINOR_OP_READ_1_2_2_4B 0xbc /* Read data bytes (Dual I/O > SPI) */ > #define SPINOR_OP_READ_1_1_4_4B 0x6c /* Read data bytes (Quad > Output SPI) */ > #define SPINOR_OP_READ_1_4_4_4B 0xec /* Read data bytes (Quad I/O > SPI) */ > +#define SPINOR_OP_READ_1_1_8_4B 0x7c /* Read data bytes (Octal > Output SPI) */ > #define SPINOR_OP_PP_4B 0x12 /* Page program (up to 256 > bytes) */ > #define SPINOR_OP_PP_1_1_4_4B 0x34 /* Quad page program */ > #define SPINOR_OP_PP_1_4_4_4B 0x3e /* Quad page program */ > -- > 2.19.0
