On Thu, 4 Oct 2018 14:18:40 +0530 Yogesh Gaur <[email protected]> wrote:
> Flash mt35xu512aba connected to FlexSPI controller supports > 1-1-8 protocol. > Added flag spi-rx-bus-width and spi-tx-bus-width with values as > 8 and 1 respectively for both flashes connected at CS0 and CS1. > > Signed-off-by: Yogesh Gaur <[email protected]> > --- > arch/arm64/boot/dts/freescale/fsl-lx2160a-rdb.dts | 4 ++++ > 1 file changed, 4 insertions(+) > > diff --git a/arch/arm64/boot/dts/freescale/fsl-lx2160a-rdb.dts > b/arch/arm64/boot/dts/freescale/fsl-lx2160a-rdb.dts > index 901ca346..817175a 100644 > --- a/arch/arm64/boot/dts/freescale/fsl-lx2160a-rdb.dts > +++ b/arch/arm64/boot/dts/freescale/fsl-lx2160a-rdb.dts > @@ -42,6 +42,8 @@ > m25p,fast-read; > spi-max-frequency = <20000000>; > reg = <0>; > + spi-rx-bus-width = <8>; > + spi-tx-bus-width = <1>; Why 1? The flash is already flagged with SPI_NOR_OCTAL_READ, which means only the read path will use 1-1-8 mode, so you can safely set spi-tx-bus-width here and let the framework choose the appropriate mode based on the flash capabilities. > }; > > mt35xu512aba1: flash@1 { > @@ -51,6 +53,8 @@ > m25p,fast-read; > spi-max-frequency = <20000000>; > reg = <1>; > + spi-rx-bus-width = <8>; > + spi-tx-bus-width = <1>; > }; > }; >
