From: Pierre Yves MORDRET <pierre-yves.mord...@st.com>
A single register of the controller holds the information for four dma
channels.
The functions stm32_dma_irq_status() don't mask the relevant bits after
the shift, thus adjacent channel's status is also reported in the returned
value.
Fixed by masking the value before returning it.
Similarly, the function stm32_dma_irq_clear() don't mask the input value
before shifting it, thus an incorrect input value could disable the
interrupts of adjacent channels.
Fixed by masking the input value before using it.
Signed-off-by: Pierre-Yves MORDRET <pierre-yves.mord...@st.com>
Signed-off-by: Antonio Borneo <borneo.anto...@gmail.com>
Signed-off-by: Vinod Koul <vinod.k...@intel.com>
---
drivers/dma/stm32-dma.c | 7 ++++++-
1 file changed, 6 insertions(+), 1 deletion(-)
diff --git a/drivers/dma/stm32-dma.c b/drivers/dma/stm32-dma.c
index 05a2974cd2c0..8c5807362a25 100644
--- a/drivers/dma/stm32-dma.c
+++ b/drivers/dma/stm32-dma.c
@@ -38,6 +38,10 @@
#define STM32_DMA_TEI BIT(3) /* Transfer Error Interrupt */
#define STM32_DMA_DMEI BIT(2) /* Direct Mode Error Interrupt */
#define STM32_DMA_FEI BIT(0) /* FIFO Error Interrupt */
+#define STM32_DMA_MASKI (STM32_DMA_TCI \
+ | STM32_DMA_TEI \
+ | STM32_DMA_DMEI \
+ | STM32_DMA_FEI)
/* DMA Stream x Configuration Register */
#define STM32_DMA_SCR(x) (0x0010 + 0x18 * (x)) /* x = 0..7 */
@@ -405,7 +409,7 @@ static u32 stm32_dma_irq_status(struct stm32_dma_chan *chan)
flags = dma_isr >> (((chan->id & 2) << 3) | ((chan->id & 1) * 6));
- return flags;
+ return flags & STM32_DMA_MASKI;
}
static void stm32_dma_irq_clear(struct stm32_dma_chan *chan, u32 flags)
@@ -420,6 +424,7 @@ static void stm32_dma_irq_clear(struct stm32_dma_chan
*chan, u32 flags)
* If (ch % 4) is 2 or 3, left shift the mask by 16 bits.
* If (ch % 4) is 1 or 3, additionally left shift the mask by 6 bits.
*/
+ flags &= STM32_DMA_MASKI;
dma_ifcr = flags << (((chan->id & 2) << 3) | ((chan->id & 1) * 6));
if (chan->id & 4)
--
2.19.0.605.g01d371f741-goog
