Hi Lubomir,
On Wed, Oct 10, 2018 at 7:10 PM Lubomir Rintel <lkund...@v3.sk> wrote:
> Strobe a GPIO line when the slave TX FIFO is filled. This is how the
> Embedded Controller on an OLPC XO-1.75 machine, that happens to be a SPI
> master, learns that it can initiate a transaction.
>
> Signed-off-by: Lubomir Rintel <lkund...@v3.sk>
Thanks for your patch!
I'm repeating my comments on the RFC below:
> --- a/drivers/spi/spi-pxa2xx.c
> +++ b/drivers/spi/spi-pxa2xx.c
> @@ -1079,6 +1079,9 @@ static int pxa2xx_spi_transfer_one(struct
> spi_controller *master,
> if (spi_controller_is_slave(master)) {
> while (drv_data->write(drv_data))
> ;
> + gpiod_set_value(drv_data->gpiod_ready, 1);
> + udelay(1);
> + gpiod_set_value(drv_data->gpiod_ready, 0);
While gpiod_set_value() handles the case of no GPIO fine, I think it's
better to explicitly check for that, so you can avoid spinning for 1 µs if
the GPIO is not present.
> }
>
> /*
> @@ -1784,6 +1787,15 @@ static int pxa2xx_spi_probe(struct platform_device
> *pdev)
> }
> }
>
> + if (platform_info->is_slave) {
> + drv_data->gpiod_ready = devm_gpiod_get_optional(dev,
> + "ready", GPIOD_OUT_LOW);
> + if (IS_ERR(drv_data->gpiod_ready)) {
> + status = (int)PTR_ERR(drv_data->gpiod_ready);
The cast to int is not needed.
Gr{oetje,eeting}s,
Geert
--
Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- ge...@linux-m68k.org
In personal conversations with technical people, I call myself a hacker. But
when I'm talking to journalists I just say "programmer" or something like that.
-- Linus Torvalds
