4.9-stable review patch. If anyone has any objections, please let me know.
------------------
From: Florian Fainelli <f.faine...@gmail.com>
[ Upstream commit 45ec318578c0c22a11f5b9927d064418e1ab1905 ]
The AON_PM_L2 is normally used to trigger and identify the source of a
wake-up event. Since the RX_SYS clock is no longer turned off, we also
have an interrupt being sent to the SYSTEMPORT INTRL_2_0 controller, and
that interrupt remains active up until the magic packet detector is
disabled which happens much later during the driver resumption.
The race happens if we have a CPU that is entering the SYSTEMPORT
INTRL2_0 handler during resume, and another CPU has managed to clear the
wake-up interrupt during bcm_sysport_resume_from_wol(). In that case, we
have the first CPU stuck in the interrupt handler with an interrupt
cause that has been cleared under its feet, and so we keep returning
IRQ_NONE and we never make any progress.
This was not a problem before because we would always turn off the
RX_SYS clock during WoL, so the SYSTEMPORT INTRL2_0 would also be turned
off as well, thus not latching the interrupt.
The fix is to make sure we do not enable either the MPD or
BRCM_TAG_MATCH interrupts since those are redundant with what the
AON_PM_L2 interrupt controller already processes and they would cause
such a race to occur.
Fixes: bb9051a2b230 ("net: systemport: Add support for WAKE_FILTER")
Fixes: 83e82f4c706b ("net: systemport: add Wake-on-LAN support")
Signed-off-by: Florian Fainelli <f.faine...@gmail.com>
Signed-off-by: David S. Miller <da...@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gre...@linuxfoundation.org>
---
drivers/net/ethernet/broadcom/bcmsysport.c | 22 +++++++++++-----------
1 file changed, 11 insertions(+), 11 deletions(-)
--- a/drivers/net/ethernet/broadcom/bcmsysport.c
+++ b/drivers/net/ethernet/broadcom/bcmsysport.c
@@ -828,14 +828,22 @@ static void bcm_sysport_resume_from_wol(
{
u32 reg;
- /* Stop monitoring MPD interrupt */
- intrl2_0_mask_set(priv, INTRL2_0_MPD);
-
/* Clear the MagicPacket detection logic */
reg = umac_readl(priv, UMAC_MPD_CTRL);
reg &= ~MPD_EN;
umac_writel(priv, reg, UMAC_MPD_CTRL);
+ reg = intrl2_0_readl(priv, INTRL2_CPU_STATUS);
+ if (reg & INTRL2_0_MPD)
+ netdev_info(priv->netdev, "Wake-on-LAN (MPD) interrupt!\n");
+
+ if (reg & INTRL2_0_BRCM_MATCH_TAG) {
+ reg = rxchk_readl(priv, RXCHK_BRCM_TAG_MATCH_STATUS) &
+ RXCHK_BRCM_TAG_MATCH_MASK;
+ netdev_info(priv->netdev,
+ "Wake-on-LAN (filters 0x%02x) interrupt!\n", reg);
+ }
+
netif_dbg(priv, wol, priv->netdev, "resumed from WOL\n");
}
@@ -868,11 +876,6 @@ static irqreturn_t bcm_sysport_rx_isr(in
if (priv->irq0_stat & INTRL2_0_TX_RING_FULL)
bcm_sysport_tx_reclaim_all(priv);
- if (priv->irq0_stat & INTRL2_0_MPD) {
- netdev_info(priv->netdev, "Wake-on-LAN interrupt!\n");
- bcm_sysport_resume_from_wol(priv);
- }
-
return IRQ_HANDLED;
}
@@ -1901,9 +1904,6 @@ static int bcm_sysport_suspend_to_wol(st
/* UniMAC receive needs to be turned on */
umac_enable_set(priv, CMD_RX_EN, 1);
- /* Enable the interrupt wake-up source */
- intrl2_0_mask_clear(priv, INTRL2_0_MPD);
-
netif_dbg(priv, wol, ndev, "entered WOL mode\n");
return 0;
