On Thu, Oct 18, 2018 at 09:02:13AM +0000, Pascal PAILLET-LME wrote:
> From: pascal paillet <p.pail...@st.com>
> 
> The stpmic1 pmic is able to manage an onkey button. This driver exposes
> the stpmic1 onkey as an input device. It can also be configured to
> shut-down the power supplies on a long key-press with an adjustable
> duration.
> 
> Signed-off-by: pascal paillet <p.pail...@st.com>

OK, so this has dependency on linux/mfd/stpmic1.h and therefore I expect
it will go in through Lee's tree.

Acked-by: Dmitry Torokhov <dmitry.torok...@gmail.com>

> ---
> changes in v4:
> * remove remove function
> * merge stpmic1_onkey_dt_params() in probe function
> * suppresse struct pmic_onkey_config
> * rename PONKEY_PU_ACTIVE to PONKEY_PU_INACTIVE
> 
>  drivers/input/misc/Kconfig         |  11 +++
>  drivers/input/misc/Makefile        |   2 +
>  drivers/input/misc/stpmic1_onkey.c | 197 
> +++++++++++++++++++++++++++++++++++++
>  3 files changed, 210 insertions(+)
>  create mode 100644 drivers/input/misc/stpmic1_onkey.c
> 
> diff --git a/drivers/input/misc/Kconfig b/drivers/input/misc/Kconfig
> index ca59a2b..279fb02 100644
> --- a/drivers/input/misc/Kconfig
> +++ b/drivers/input/misc/Kconfig
> @@ -851,4 +851,15 @@ config INPUT_SC27XX_VIBRA
>         To compile this driver as a module, choose M here. The module will
>         be called sc27xx_vibra.
>  
> +config INPUT_STPMIC1_ONKEY
> +     tristate "STPMIC1 PMIC Onkey support"
> +     depends on MFD_STPMIC1
> +     help
> +       Say Y to enable support of onkey embedded into STPMIC1 PMIC. onkey
> +       can be used to wakeup from low power modes and force a shut-down on
> +       long press.
> +
> +       To compile this driver as a module, choose M here: the
> +       module will be called stpmic1_onkey.
> +
>  endif
> diff --git a/drivers/input/misc/Makefile b/drivers/input/misc/Makefile
> index 9d0f9d1..1b44202 100644
> --- a/drivers/input/misc/Makefile
> +++ b/drivers/input/misc/Makefile
> @@ -71,6 +71,7 @@ obj-$(CONFIG_INPUT_SGI_BTNS)                += sgi_btns.o
>  obj-$(CONFIG_INPUT_SIRFSOC_ONKEY)    += sirfsoc-onkey.o
>  obj-$(CONFIG_INPUT_SOC_BUTTON_ARRAY) += soc_button_array.o
>  obj-$(CONFIG_INPUT_SPARCSPKR)                += sparcspkr.o
> +obj-$(CONFIG_INPUT_STPMIC1_ONKEY)    += stpmic1_onkey.o
>  obj-$(CONFIG_INPUT_TPS65218_PWRBUTTON)       += tps65218-pwrbutton.o
>  obj-$(CONFIG_INPUT_TWL4030_PWRBUTTON)        += twl4030-pwrbutton.o
>  obj-$(CONFIG_INPUT_TWL4030_VIBRA)    += twl4030-vibra.o
> @@ -81,3 +82,4 @@ obj-$(CONFIG_INPUT_WM831X_ON)               += wm831x-on.o
>  obj-$(CONFIG_INPUT_XEN_KBDDEV_FRONTEND)      += xen-kbdfront.o
>  obj-$(CONFIG_INPUT_YEALINK)          += yealink.o
>  obj-$(CONFIG_INPUT_IDEAPAD_SLIDEBAR) += ideapad_slidebar.o
> +
> diff --git a/drivers/input/misc/stpmic1_onkey.c 
> b/drivers/input/misc/stpmic1_onkey.c
> new file mode 100644
> index 0000000..6a7f08b
> --- /dev/null
> +++ b/drivers/input/misc/stpmic1_onkey.c
> @@ -0,0 +1,197 @@
> +// SPDX-License-Identifier: GPL-2.0
> +// Copyright (C) STMicroelectronics 2018
> +// Author: Pascal Paillet <p.pail...@st.com> for STMicroelectronics.
> +
> +#include <linux/input.h>
> +#include <linux/interrupt.h>
> +#include <linux/mfd/stpmic1.h>
> +#include <linux/module.h>
> +#include <linux/of.h>
> +#include <linux/platform_device.h>
> +#include <linux/property.h>
> +#include <linux/regmap.h>
> +
> +/**
> + * struct stpmic1_onkey - OnKey data
> + * @input_dev:               pointer to input device
> + * @irq_falling:     irq that we are hooked on to
> + * @irq_rising:              irq that we are hooked on to
> + */
> +struct stpmic1_onkey {
> +     struct input_dev *input_dev;
> +     int irq_falling;
> +     int irq_rising;
> +};
> +
> +static irqreturn_t onkey_falling_irq(int irq, void *ponkey)
> +{
> +     struct stpmic1_onkey *onkey = ponkey;
> +     struct input_dev *input_dev = onkey->input_dev;
> +
> +     input_report_key(input_dev, KEY_POWER, 1);
> +     pm_wakeup_event(input_dev->dev.parent, 0);
> +     input_sync(input_dev);
> +
> +     return IRQ_HANDLED;
> +}
> +
> +static irqreturn_t onkey_rising_irq(int irq, void *ponkey)
> +{
> +     struct stpmic1_onkey *onkey = ponkey;
> +     struct input_dev *input_dev = onkey->input_dev;
> +
> +     input_report_key(input_dev, KEY_POWER, 0);
> +     pm_wakeup_event(input_dev->dev.parent, 0);
> +     input_sync(input_dev);
> +
> +     return IRQ_HANDLED;
> +}
> +
> +static int stpmic1_onkey_probe(struct platform_device *pdev)
> +{
> +     struct stpmic1 *pmic = dev_get_drvdata(pdev->dev.parent);
> +     struct device *dev = &pdev->dev;
> +     struct input_dev *input_dev;
> +     struct stpmic1_onkey *onkey;
> +     unsigned int val, reg = 0;
> +     int error;
> +
> +     onkey = devm_kzalloc(dev, sizeof(*onkey), GFP_KERNEL);
> +     if (!onkey)
> +             return -ENOMEM;
> +
> +     onkey->irq_falling = platform_get_irq_byname(pdev, "onkey-falling");
> +     if (onkey->irq_falling < 0) {
> +             dev_err(dev, "failed: request IRQ onkey-falling %d\n",
> +                     onkey->irq_falling);
> +             return onkey->irq_falling;
> +     }
> +
> +     onkey->irq_rising = platform_get_irq_byname(pdev, "onkey-rising");
> +     if (onkey->irq_rising < 0) {
> +             dev_err(dev, "failed: request IRQ onkey-rising %d\n",
> +                     onkey->irq_rising);
> +             return onkey->irq_rising;
> +     }
> +
> +     if (!device_property_read_u32(dev, "power-off-time-sec", &val)) {
> +             if ((val > 0) && (val <= 16)) {
> +                     dev_dbg(dev, "power-off-time=%d seconds\n", val);
> +                     reg |= PONKEY_PWR_OFF;
> +                     reg |= ((16 - val) & PONKEY_TURNOFF_TIMER_MASK);
> +             } else {
> +                     dev_err(dev, "power-off-time-sec out of range\n");
> +                     return -EINVAL;
> +             }
> +     }
> +
> +     if (device_property_present(dev, "st,onkey-clear-cc-flag"))
> +             reg |= PONKEY_CC_FLAG_CLEAR;
> +
> +     error = regmap_update_bits(pmic->regmap, PKEY_TURNOFF_CR,
> +                                PONKEY_TURNOFF_MASK, reg);
> +     if (error) {
> +             dev_err(dev, "PKEY_TURNOFF_CR write failed: %d\n", error);
> +             return error;
> +     }
> +
> +     if (device_property_present(dev, "st,onkey-pu-inactive")) {
> +             error = regmap_update_bits(pmic->regmap, PADS_PULL_CR,
> +                                        PONKEY_PU_INACTIVE,
> +                                        PONKEY_PU_INACTIVE);
> +             if (error) {
> +                     dev_err(dev, "ONKEY Pads configuration failed: %d\n", 
> error);
> +                     return error;
> +             }
> +     }
> +
> +     input_dev = devm_input_allocate_device(dev);
> +     if (!input_dev) {
> +             dev_err(dev, "Can't allocate Pwr Onkey Input Device\n");
> +             return -ENOMEM;
> +     }
> +
> +     input_dev->name = "pmic_onkey";
> +     input_dev->phys = "pmic_onkey/input0";
> +
> +     input_set_capability(input_dev, EV_KEY, KEY_POWER);
> +
> +     onkey->input_dev = input_dev;
> +
> +     /* interrupt is nested in a thread */
> +     error = devm_request_threaded_irq(dev, onkey->irq_falling, NULL,
> +                                       onkey_falling_irq, IRQF_ONESHOT,
> +                                       dev_name(dev), onkey);
> +     if (error) {
> +             dev_err(dev, "Can't get IRQ Onkey Falling: %d\n", error);
> +             return error;
> +     }
> +
> +     error = devm_request_threaded_irq(dev, onkey->irq_rising, NULL,
> +                                       onkey_rising_irq, IRQF_ONESHOT,
> +                                       dev_name(dev), onkey);
> +     if (error) {
> +             dev_err(dev, "Can't get IRQ Onkey Rising: %d\n", error);
> +             return error;
> +     }
> +
> +     error = input_register_device(input_dev);
> +     if (error) {
> +             dev_err(dev, "Can't register power button: %d\n", error);
> +             return error;
> +     }
> +
> +     platform_set_drvdata(pdev, onkey);
> +     device_init_wakeup(dev, true);
> +
> +     return 0;
> +}
> +
> +static int __maybe_unused stpmic1_onkey_suspend(struct device *dev)
> +{
> +     struct platform_device *pdev = to_platform_device(dev);
> +     struct stpmic1_onkey *onkey = platform_get_drvdata(pdev);
> +
> +     if (device_may_wakeup(dev)) {
> +             enable_irq_wake(onkey->irq_falling);
> +             enable_irq_wake(onkey->irq_rising);
> +     }
> +     return 0;
> +}
> +
> +static int __maybe_unused stpmic1_onkey_resume(struct device *dev)
> +{
> +     struct platform_device *pdev = to_platform_device(dev);
> +     struct stpmic1_onkey *onkey = platform_get_drvdata(pdev);
> +
> +     if (device_may_wakeup(dev)) {
> +             disable_irq_wake(onkey->irq_falling);
> +             disable_irq_wake(onkey->irq_rising);
> +     }
> +     return 0;
> +}
> +
> +static SIMPLE_DEV_PM_OPS(stpmic1_onkey_pm,
> +                      stpmic1_onkey_suspend,
> +                      stpmic1_onkey_resume);
> +
> +static const struct of_device_id of_stpmic1_onkey_match[] = {
> +     { .compatible = "st,stpmic1-onkey" },
> +     { },
> +};
> +
> +MODULE_DEVICE_TABLE(of, of_stpmic1_onkey_match);
> +
> +static struct platform_driver stpmic1_onkey_driver = {
> +     .probe  = stpmic1_onkey_probe,
> +     .driver = {
> +             .name   = "stpmic1_onkey",
> +             .of_match_table = of_match_ptr(of_stpmic1_onkey_match),
> +             .pm     = &stpmic1_onkey_pm,
> +     },
> +};
> +module_platform_driver(stpmic1_onkey_driver);
> +
> +MODULE_DESCRIPTION("Onkey driver for STPMIC1");
> +MODULE_AUTHOR("Pascal Paillet <p.pail...@st.com>");
> +MODULE_LICENSE("GPL v2");
> -- 
> 1.9.1

-- 
Dmitry

Reply via email to