[RFC PATCH v2 17/17] ARM: dts: tegra30: colibri: Setup voltage regulators for DVFS

[Dmitry Osipenko]

Set min/max regulators voltage and add CPU node that hooks up CPU with
voltage regulators.

Signed-off-by: Dmitry Osipenko <dig...@gmail.com>
---
 arch/arm/boot/dts/tegra30-colibri.dtsi | 19 ++++++++++++++++---
 1 file changed, 16 insertions(+), 3 deletions(-)

diff --git a/arch/arm/boot/dts/tegra30-colibri.dtsi 
b/arch/arm/boot/dts/tegra30-colibri.dtsi
index 35af03ca9e90..c59099c1e2c3 100644
--- a/arch/arm/boot/dts/tegra30-colibri.dtsi
+++ b/arch/arm/boot/dts/tegra30-colibri.dtsi
@@ -763,8 +763,11 @@
 
                                vddctrl_reg: vddctrl {
                                        regulator-name = "+V1.0_VDD_CPU";
-                                       regulator-min-microvolt = <1150000>;
-                                       regulator-max-microvolt = <1150000>;
+                                       regulator-min-microvolt = <800000>;
+                                       regulator-max-microvolt = <1250000>;
+                                       regulator-coupled-with = 
<&core_vdd_reg>;
+                                       regulator-coupled-max-spread = <300000>;
+                                       regulator-max-step-microvolt = <100000>;
                                        regulator-always-on;
                                };
 
@@ -882,13 +885,16 @@
                };
 
                /* SW: +V1.2_VDD_CORE */
-               regulator@60 {
+               core_vdd_reg: regulator@60 {
                        compatible = "ti,tps62362";
                        reg = <0x60>;
 
                        regulator-name = "tps62362-vout";
                        regulator-min-microvolt = <900000>;
                        regulator-max-microvolt = <1400000>;
+                       regulator-coupled-with = <&vddctrl_reg>;
+                       regulator-coupled-max-spread = <300000>;
+                       regulator-max-step-microvolt = <100000>;
                        regulator-boot-on;
                        regulator-always-on;
                        ti,vsel0-state-low;
@@ -1027,6 +1033,13 @@
                         <&tegra_car TEGRA30_CLK_EXTERN1>;
                clock-names = "pll_a", "pll_a_out0", "mclk";
        };
+
+       cpus {
+               cpu0: cpu@0 {
+                       cpu-supply = <&vddctrl_reg>;
+                       core-supply = <&core_vdd_reg>;
+               };
+       };
 };
 
 &gpio {
-- 
2.19.0