On Tue, Oct 23, 2018 at 05:30:44AM +0000, Joakim Zhang wrote: > From: Dong Aisheng <aisheng.d...@nxp.com> > > Add stop-mode property which is required by stop mode wakeup > feature. > > Signed-off-by: Dong Aisheng <aisheng.d...@nxp.com> > Signed-off-by: Joakim Zhang <qiangqing.zh...@nxp.com> > --- > arch/arm/boot/dts/imx6sx.dtsi | 2 ++ > 1 file changed, 2 insertions(+) > > diff --git a/arch/arm/boot/dts/imx6sx.dtsi b/arch/arm/boot/dts/imx6sx.dtsi > index 844caa39364f..3f459d6da7fc 100644 > --- a/arch/arm/boot/dts/imx6sx.dtsi > +++ b/arch/arm/boot/dts/imx6sx.dtsi > @@ -448,6 +448,7 @@ > clocks = <&clks IMX6SX_CLK_CAN1_IPG>, > <&clks IMX6SX_CLK_CAN1_SERIAL>; > clock-names = "ipg", "per"; > + stop-mode = <&gpr 0x10 1 0x10 17>;
Is it supported by upstream? I cannot find this property in ether flexcan bindings doc or kernel driver. Shawn > status = "disabled"; > }; > > @@ -458,6 +459,7 @@ > clocks = <&clks IMX6SX_CLK_CAN2_IPG>, > <&clks IMX6SX_CLK_CAN2_SERIAL>; > clock-names = "ipg", "per"; > + stop-mode = <&gpr 0x10 2 0x10 18>; > status = "disabled"; > }; > > -- > 2.17.1 >
