On Wed 2018-10-10 19:09:26, Lubomir Rintel wrote: > This is the SPI controller found on Marvel MMP2 and perhaps more > platforms. > > Reviewed-by: Rob Herring <[email protected]> > Signed-off-by: Lubomir Rintel <[email protected]>
Acked-by: Pavel Machek <[email protected]> Rob, do you want to apply this? Pavel > @@ -0,0 +1,24 @@ > +PXA2xx SSP SPI Controller > + > +Required properties: > +- compatible: Must be "marvell,mmp2-ssp". > +- reg: Offset and length of the device's register set. > +- interrupts: Should be the interrupt number. > +- clocks: Should contain a single entry describing the clock input. > +- #address-cells: Number of cells required to define a chip select address. > +- #size-cells: Should be zero. > + > +Optional properties: > +- cs-gpios: list of GPIO chip selects. See the SPI bus bindings, > + Documentation/devicetree/bindings/spi/spi-bus.txt > + > +Child nodes represent devices on the SPI bus > + See ../spi/spi-bus.txt > + > +Example: > + ssp1: spi@d4035000 { > + compatible = "marvell,mmp2-ssp"; > + reg = <0xd4035000 0x1000>; > + clocks = <&soc_clocks MMP2_CLK_SSP0>; > + interrupts = <0>; > + }; -- (english) http://www.livejournal.com/~pavelmachek (cesky, pictures) http://atrey.karlin.mff.cuni.cz/~pavel/picture/horses/blog.html
signature.asc
Description: Digital signature
