In an attempt to better describe the HDMI PLL, a single DCO clock was
left for GXBB and GXL, but the GXL DCO does not have a pre-multiplier.
This patch adds back a GXL specific HDMI PLL DCO with xtal as parent.
Fixes: 87173557d2f6 ("clk: meson: clk-pll: remove od parameters")
Signed-off-by: Neil Armstrong <[email protected]>
---
drivers/clk/meson/gxbb.c | 51 ++++++++++++++++++++++++++++++++++++++++++++++--
1 file changed, 49 insertions(+), 2 deletions(-)
diff --git a/drivers/clk/meson/gxbb.c b/drivers/clk/meson/gxbb.c
index 9309cfa..0fd354b 100644
--- a/drivers/clk/meson/gxbb.c
+++ b/drivers/clk/meson/gxbb.c
@@ -199,6 +199,52 @@ static struct clk_regmap gxbb_hdmi_pll_dco = {
},
};
+static struct clk_regmap gxl_hdmi_pll_dco = {
+ .data = &(struct meson_clk_pll_data){
+ .en = {
+ .reg_off = HHI_HDMI_PLL_CNTL,
+ .shift = 30,
+ .width = 1,
+ },
+ .m = {
+ .reg_off = HHI_HDMI_PLL_CNTL,
+ .shift = 0,
+ .width = 9,
+ },
+ .n = {
+ .reg_off = HHI_HDMI_PLL_CNTL,
+ .shift = 9,
+ .width = 5,
+ },
+ .frac = {
+ .reg_off = HHI_HDMI_PLL_CNTL2,
+ .shift = 0,
+ .width = 12,
+ },
+ .l = {
+ .reg_off = HHI_HDMI_PLL_CNTL,
+ .shift = 31,
+ .width = 1,
+ },
+ .rst = {
+ .reg_off = HHI_HDMI_PLL_CNTL,
+ .shift = 28,
+ .width = 1,
+ },
+ },
+ .hw.init = &(struct clk_init_data){
+ .name = "hdmi_pll_dco",
+ .ops = &meson_clk_pll_ro_ops,
+ .parent_names = (const char *[]){ "xtal" },
+ .num_parents = 1,
+ /*
+ * Display directly handle hdmi pll registers ATM, we need
+ * NOCACHE to keep our view of the clock as accurate as possible
+ */
+ .flags = CLK_GET_RATE_NOCACHE,
+ },
+};
+
static struct clk_regmap gxbb_hdmi_pll_od = {
.data = &(struct clk_regmap_div_data){
.offset = HHI_HDMI_PLL_CNTL2,
@@ -2089,7 +2135,7 @@ static struct clk_hw_onecell_data gxl_hw_onecell_data = {
[CLKID_GEN_CLK_DIV] = &gxbb_gen_clk_div.hw,
[CLKID_GEN_CLK] = &gxbb_gen_clk.hw,
[CLKID_FIXED_PLL_DCO] = &gxbb_fixed_pll_dco.hw,
- [CLKID_HDMI_PLL_DCO] = &gxbb_hdmi_pll_dco.hw,
+ [CLKID_HDMI_PLL_DCO] = &gxl_hdmi_pll_dco.hw,
[CLKID_HDMI_PLL_OD] = &gxl_hdmi_pll_od.hw,
[CLKID_HDMI_PLL_OD2] = &gxl_hdmi_pll_od2.hw,
[CLKID_SYS_PLL_DCO] = &gxbb_sys_pll_dco.hw,
@@ -2104,6 +2150,7 @@ static struct clk_regmap *const gxbb_clk_regmaps[] = {
&gxbb_hdmi_pll,
&gxbb_hdmi_pll_od,
&gxbb_hdmi_pll_od2,
+ &gxbb_hdmi_pll_dco,
};
static struct clk_regmap *const gxl_clk_regmaps[] = {
@@ -2111,6 +2158,7 @@ static struct clk_regmap *const gxl_clk_regmaps[] = {
&gxl_hdmi_pll,
&gxl_hdmi_pll_od,
&gxl_hdmi_pll_od2,
+ &gxl_hdmi_pll_dco,
};
static struct clk_regmap *const gx_clk_regmaps[] = {
@@ -2266,7 +2314,6 @@ static struct clk_regmap *const gx_clk_regmaps[] = {
&gxbb_gen_clk_div,
&gxbb_gen_clk,
&gxbb_fixed_pll_dco,
- &gxbb_hdmi_pll_dco,
&gxbb_sys_pll_dco,
&gxbb_gp0_pll,
};
--
2.7.4
