4.14-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Maciej S. Szmigiero <m...@maciej.szmigiero.name>

commit 95691e3eddc41da2d1cd3cca51fecdfb46bd85bc upstream.

Currently, "disable_clkrun" yenta_socket module parameter is only
implemented for TI CardBus bridges.
Add also an implementation for Ricoh bridges that have the necessary
setting documented in publicly available datasheets.

Tested on a RL5C476II with a Sunrich C-160 CardBus NIC that doesn't work
correctly unless the CLKRUN protocol is disabled.

Let's also make it clear in its description that the "disable_clkrun"
module parameter only works on these two previously mentioned brands of
CardBus bridges.

Signed-off-by: Maciej S. Szmigiero <m...@maciej.szmigiero.name>
Cc: sta...@vger.kernel.org
Signed-off-by: Dominik Brodowski <li...@dominikbrodowski.net>
Signed-off-by: Greg Kroah-Hartman <gre...@linuxfoundation.org>

---
 drivers/pcmcia/ricoh.h        |   35 +++++++++++++++++++++++++++++++++++
 drivers/pcmcia/yenta_socket.c |    3 ++-
 2 files changed, 37 insertions(+), 1 deletion(-)

--- a/drivers/pcmcia/ricoh.h
+++ b/drivers/pcmcia/ricoh.h
@@ -119,6 +119,10 @@
 #define  RL5C4XX_MISC_CONTROL           0x2F /* 8 bit */
 #define  RL5C4XX_ZV_ENABLE              0x08
 
+/* Misc Control 3 Register */
+#define RL5C4XX_MISC3                  0x00A2 /* 16 bit */
+#define  RL5C47X_MISC3_CB_CLKRUN_DIS   BIT(1)
+
 #ifdef __YENTA_H
 
 #define rl_misc(socket)                ((socket)->private[0])
@@ -156,6 +160,35 @@ static void ricoh_set_zv(struct yenta_so
         }
 }
 
+static void ricoh_set_clkrun(struct yenta_socket *socket, bool quiet)
+{
+       u16 misc3;
+
+       /*
+        * RL5C475II likely has this setting, too, however no datasheet
+        * is publicly available for this chip
+        */
+       if (socket->dev->device != PCI_DEVICE_ID_RICOH_RL5C476 &&
+           socket->dev->device != PCI_DEVICE_ID_RICOH_RL5C478)
+               return;
+
+       if (socket->dev->revision < 0x80)
+               return;
+
+       misc3 = config_readw(socket, RL5C4XX_MISC3);
+       if (misc3 & RL5C47X_MISC3_CB_CLKRUN_DIS) {
+               if (!quiet)
+                       dev_dbg(&socket->dev->dev,
+                               "CLKRUN feature already disabled\n");
+       } else if (disable_clkrun) {
+               if (!quiet)
+                       dev_info(&socket->dev->dev,
+                                "Disabling CLKRUN feature\n");
+               misc3 |= RL5C47X_MISC3_CB_CLKRUN_DIS;
+               config_writew(socket, RL5C4XX_MISC3, misc3);
+       }
+}
+
 static void ricoh_save_state(struct yenta_socket *socket)
 {
        rl_misc(socket) = config_readw(socket, RL5C4XX_MISC);
@@ -172,6 +205,7 @@ static void ricoh_restore_state(struct y
        config_writew(socket, RL5C4XX_16BIT_IO_0, rl_io(socket));
        config_writew(socket, RL5C4XX_16BIT_MEM_0, rl_mem(socket));
        config_writew(socket, RL5C4XX_CONFIG, rl_config(socket));
+       ricoh_set_clkrun(socket, true);
 }
 
 
@@ -197,6 +231,7 @@ static int ricoh_override(struct yenta_s
        config_writew(socket, RL5C4XX_CONFIG, config);
 
        ricoh_set_zv(socket);
+       ricoh_set_clkrun(socket, false);
 
        return 0;
 }
--- a/drivers/pcmcia/yenta_socket.c
+++ b/drivers/pcmcia/yenta_socket.c
@@ -26,7 +26,8 @@
 
 static bool disable_clkrun;
 module_param(disable_clkrun, bool, 0444);
-MODULE_PARM_DESC(disable_clkrun, "If PC card doesn't function properly, please 
try this option");
+MODULE_PARM_DESC(disable_clkrun,
+                "If PC card doesn't function properly, please try this option 
(TI and Ricoh bridges only)");
 
 static bool isa_probe = 1;
 module_param(isa_probe, bool, 0444);


Reply via email to