Add pinctrls required for camera sensors: - power down signal; - reset signal; - camera external clock.
Signed-off-by: Todor Tomov <[email protected]> --- arch/arm64/boot/dts/qcom/msm8916-pins.dtsi | 64 ++++++++++++++++++++ arch/arm64/boot/dts/qcom/msm8996-pins.dtsi | 96 ++++++++++++++++++++++++++++++ 2 files changed, 160 insertions(+) diff --git a/arch/arm64/boot/dts/qcom/msm8916-pins.dtsi b/arch/arm64/boot/dts/qcom/msm8916-pins.dtsi index 990120c..aa9a0ff 100644 --- a/arch/arm64/boot/dts/qcom/msm8916-pins.dtsi +++ b/arch/arm64/boot/dts/qcom/msm8916-pins.dtsi @@ -701,4 +701,68 @@ bias-disable; }; }; + + camera_front_default: camera_front_default { + pinmux_pwdn { + function = "gpio"; + pins = "gpio33"; + }; + pinconf_pwdn { + pins = "gpio33"; + drive-strength = <16>; + bias-disable; + }; + + pinmux_rst { + function = "gpio"; + pins = "gpio28"; + }; + pinconf_rst { + pins = "gpio28"; + drive-strength = <16>; + bias-disable; + }; + + pinmux_mclk1 { + function = "cam_mclk1"; + pins = "gpio27"; + }; + pinconf_mclk1 { + pins = "gpio27"; + drive-strength = <16>; + bias-disable; + }; + }; + + camera_rear_default: camera_rear_default { + pinmux_pwdn { + function = "gpio"; + pins = "gpio34"; + }; + pinconf_pwdn { + pins = "gpio34"; + drive-strength = <16>; + bias-disable; + }; + + pinmux_rst { + function = "gpio"; + pins = "gpio35"; + }; + pinconf_rst { + pins = "gpio35"; + drive-strength = <16>; + bias-disable; + }; + + pinmux_mclk0 { + function = "cam_mclk0"; + pins = "gpio26"; + }; + pinconf_mclk0 { + pins = "gpio26"; + drive-strength = <16>; + bias-disable; + }; + }; }; diff --git a/arch/arm64/boot/dts/qcom/msm8996-pins.dtsi b/arch/arm64/boot/dts/qcom/msm8996-pins.dtsi index d6a0a4a..8d5114d 100644 --- a/arch/arm64/boot/dts/qcom/msm8996-pins.dtsi +++ b/arch/arm64/boot/dts/qcom/msm8996-pins.dtsi @@ -519,4 +519,100 @@ bias-disable; }; }; + + camera_board_default: camera_board_default { + mux_pwdn { + function = "gpio"; + pins = "gpio98"; + }; + config_pwdn { + pins = "gpio98"; + drive-strength = <16>; + bias-disable; + }; + + mux_rst { + function = "gpio"; + pins = "gpio104"; + }; + config_rst { + pins = "gpio104"; + drive-strength = <16>; + bias-disable; + }; + + mux_mclk1 { + function = "cam_mclk"; + pins = "gpio14"; + }; + config_mclk1 { + pins = "gpio14"; + drive-strength = <16>; + bias-disable; + }; + }; + + camera_front_default: camera_front_default { + mux_pwdn { + function = "gpio"; + pins = "gpio133"; + }; + config_pwdn { + pins = "gpio133"; + drive-strength = <16>; + bias-disable; + }; + + mux_rst { + function = "gpio"; + pins = "gpio23"; + }; + config_rst { + pins = "gpio23"; + drive-strength = <16>; + bias-disable; + }; + + mux_mclk2 { + function = "cam_mclk"; + pins = "gpio15"; + }; + config_mclk2 { + pins = "gpio15"; + drive-strength = <16>; + bias-disable; + }; + }; + + camera_rear_default: camera_rear_default { + mux_pwdn { + function = "gpio"; + pins = "gpio26"; + }; + config_pwdn { + pins = "gpio26"; + drive-strength = <16>; + bias-disable; + }; + + mux_rst { + function = "gpio"; + pins = "gpio25"; + }; + config_rst { + pins = "gpio25"; + drive-strength = <16>; + bias-disable; + }; + + mux_mclk0 { + function = "cam_mclk"; + pins = "gpio13"; + }; + config_mclk0 { + pins = "gpio13"; + drive-strength = <16>; + bias-disable; + }; + }; }; -- 2.7.4
