On Thu, Nov 15, 2018 at 08:33:27AM -0500, Liang, Kan wrote: > > > On 11/15/2018 8:21 AM, Jiri Olsa wrote: > > On Wed, Nov 14, 2018 at 01:24:16PM -0800, kan.li...@linux.intel.com wrote: > > > From: Kan Liang <kan.li...@linux.intel.com> > > > > > > Add JSON metrics (based on event list v1) for Cascadelake server > > > > hum mail server probably crippled the email so it won't apply: > > > > patching file pmu-events/arch/x86/cascadelakex/cache.json > > patching file pmu-events/arch/x86/cascadelakex/clx-metrics.json > > patching file pmu-events/arch/x86/cascadelakex/floating-point.json > > patching file pmu-events/arch/x86/cascadelakex/frontend.json > > patching file pmu-events/arch/x86/cascadelakex/memory.json > > patching file pmu-events/arch/x86/cascadelakex/other.json > > patching file pmu-events/arch/x86/cascadelakex/pipeline.json > > patch: **** malformed patch at line 29879: ow status bit and resets the > > counter to less than MAX. The reset value to the counter is not clocked > > immediately so the overflow status bit will flip 'high (1)' and generate > > another PMI (if enabled) after which the reset value gets clocked into the > > counter. Therefore, software will get the interrupt, read the overflow > > status bit '1 for bit 34 while the counter value is less than MAX. Software > > should ignore this case.", > > > > I've similar error before and it was because of the 998 chars size > > limit for line.. I guess you could either post it as attachment or > > change the transfer encoding > > > > The patch is attached. Can it be applied?
yep, that one works thanks, jirka