On 11:31-20181113, Vignesh R wrote: > Add DT entries for I2C instances present in AM654 SoC. >
I2C does'nt really belong to a series introducing pinmux ;)... but yeah, I get the dependency of pinmux. > Signed-off-by: Vignesh R <[email protected]> > --- > arch/arm64/boot/dts/ti/k3-am65-main.dtsi | 44 ++++++++++++ > arch/arm64/boot/dts/ti/k3-am65-mcu.dtsi | 11 +++ > arch/arm64/boot/dts/ti/k3-am65-wakeup.dtsi | 11 +++ > arch/arm64/boot/dts/ti/k3-am65.dtsi | 6 ++ > .../arm64/boot/dts/ti/k3-am654-base-board.dts | 70 +++++++++++++++++++ > 5 files changed, 142 insertions(+) > > diff --git a/arch/arm64/boot/dts/ti/k3-am65-main.dtsi > b/arch/arm64/boot/dts/ti/k3-am65-main.dtsi > index f7c2a60d5c80..916434839603 100644 > --- a/arch/arm64/boot/dts/ti/k3-am65-main.dtsi > +++ b/arch/arm64/boot/dts/ti/k3-am65-main.dtsi > @@ -85,4 +85,48 @@ > pinctrl-single,register-width = <32>; > pinctrl-single,function-mask = <0xffffffff>; > }; > + > + main_i2c0: i2c@2000000 { > + compatible = "ti,am654-i2c", "ti,omap4-i2c"; > + reg = <0x0 0x2000000 0x0 0x100>; > + interrupts = <GIC_SPI 200 IRQ_TYPE_LEVEL_HIGH>; > + #address-cells = <1>; > + #size-cells = <0>; > + clock-names = "fck"; > + clocks = <&k3_clks 110 1>; > + power-domains = <&k3_pds 110>; > + }; > + > + main_i2c1: i2c@2010000 { > + compatible = "ti,am654-i2c", "ti,omap4-i2c"; > + reg = <0x0 0x2010000 0x0 0x100>; > + interrupts = <GIC_SPI 201 IRQ_TYPE_LEVEL_HIGH>; > + #address-cells = <1>; > + #size-cells = <0>; > + clock-names = "fck"; > + clocks = <&k3_clks 111 1>; > + power-domains = <&k3_pds 111>; > + }; > + > + main_i2c2: i2c@2020000 { > + compatible = "ti,am654-i2c", "ti,omap4-i2c"; > + reg = <0x0 0x2020000 0x0 0x100>; > + interrupts = <GIC_SPI 202 IRQ_TYPE_LEVEL_HIGH>; > + #address-cells = <1>; > + #size-cells = <0>; > + clock-names = "fck"; > + clocks = <&k3_clks 112 1>; > + power-domains = <&k3_pds 112>; > + }; > + > + main_i2c3: i2c@2030000 { > + compatible = "ti,am654-i2c", "ti,omap4-i2c"; > + reg = <0x0 0x2030000 0x0 0x100>; > + interrupts = <GIC_SPI 203 IRQ_TYPE_LEVEL_HIGH>; > + #address-cells = <1>; > + #size-cells = <0>; > + clock-names = "fck"; > + clocks = <&k3_clks 113 1>; > + power-domains = <&k3_pds 113>; > + }; > }; > diff --git a/arch/arm64/boot/dts/ti/k3-am65-mcu.dtsi > b/arch/arm64/boot/dts/ti/k3-am65-mcu.dtsi > index 8c611d16df44..1fd027748e1f 100644 > --- a/arch/arm64/boot/dts/ti/k3-am65-mcu.dtsi > +++ b/arch/arm64/boot/dts/ti/k3-am65-mcu.dtsi > @@ -15,4 +15,15 @@ > clock-frequency = <96000000>; > current-speed = <115200>; > }; > + > + mcu_i2c0: i2c@40b00000 { > + compatible = "ti,am654-i2c", "ti,omap4-i2c"; > + reg = <0x0 0x40b00000 0x0 0x100>; > + interrupts = <GIC_SPI 564 IRQ_TYPE_LEVEL_HIGH>; > + #address-cells = <1>; > + #size-cells = <0>; > + clock-names = "fck"; > + clocks = <&k3_clks 114 1>; > + power-domains = <&k3_pds 114>; > + }; > }; > diff --git a/arch/arm64/boot/dts/ti/k3-am65-wakeup.dtsi > b/arch/arm64/boot/dts/ti/k3-am65-wakeup.dtsi > index 19b46f40789b..9e8467ce7ad8 100644 > --- a/arch/arm64/boot/dts/ti/k3-am65-wakeup.dtsi > +++ b/arch/arm64/boot/dts/ti/k3-am65-wakeup.dtsi > @@ -51,4 +51,15 @@ > clock-frequency = <48000000>; > current-speed = <115200>; > }; > + > + wkup_i2c0: i2c@42120000 { > + compatible = "ti,am654-i2c", "ti,omap4-i2c"; > + reg = <0x42120000 0x100>; > + interrupts = <GIC_SPI 696 IRQ_TYPE_LEVEL_HIGH>; > + #address-cells = <1>; > + #size-cells = <0>; > + clock-names = "fck"; > + clocks = <&k3_clks 115 1>; > + power-domains = <&k3_pds 115>; > + }; > }; > diff --git a/arch/arm64/boot/dts/ti/k3-am65.dtsi > b/arch/arm64/boot/dts/ti/k3-am65.dtsi > index 6fdfc7815811..50f4be2047a9 100644 > --- a/arch/arm64/boot/dts/ti/k3-am65.dtsi > +++ b/arch/arm64/boot/dts/ti/k3-am65.dtsi > @@ -23,6 +23,12 @@ > serial2 = &main_uart0; > serial3 = &main_uart1; > serial4 = &main_uart2; > + i2c0 = &wkup_i2c0; > + i2c1 = &mcu_i2c0; > + i2c2 = &main_i2c0; > + i2c3 = &main_i2c1; > + i2c4 = &main_i2c2; > + i2c5 = &main_i2c3; > }; > > chosen { }; > diff --git a/arch/arm64/boot/dts/ti/k3-am654-base-board.dts > b/arch/arm64/boot/dts/ti/k3-am654-base-board.dts > index cbf9d3dfeaa3..bd5a0069191d 100644 > --- a/arch/arm64/boot/dts/ti/k3-am654-base-board.dts > +++ b/arch/arm64/boot/dts/ti/k3-am654-base-board.dts > @@ -35,6 +35,15 @@ > }; > }; > > +&wkup_pmx0 { > + wkup_i2c0_pins_default: wkup-i2c0-pins-default { > + pinctrl-single,pins = < > + AM65X_WKUP_IOPAD(0x00e0, PIN_INPUT, 0) /* (AC7) > WKUP_I2C0_SCL */ > + AM65X_WKUP_IOPAD(0x00e4, PIN_INPUT, 0) /* (AD6) > WKUP_I2C0_SDA */ > + >; > + }; > +}; > + > &main_pmx0 { > main_uart0_pins_default: main-uart0-pins-default { > pinctrl-single,pins = < > @@ -44,6 +53,29 @@ > AM65X_IOPAD(0x01f0, PIN_OUTPUT, 0) /* (AD11) > UART0_RTSn */ > >; > }; > + > + main_i2c2_pins_default: main-i2c2-pins-default { > + pinctrl-single,pins = < > + AM65X_IOPAD(0x0074, PIN_INPUT, 5) /* (T27) > GPMC0_CSn3.I2C2_SCL */ > + AM65X_IOPAD(0x0070, PIN_INPUT, 5) /* (R25) > GPMC0_CSn2.I2C2_SDA */ > + >; > + }; > +}; > + > +&main_pmx1 { > + main_i2c0_pins_default: main-i2c0-pins-default { > + pinctrl-single,pins = < > + AM65X_IOPAD(0x0000, PIN_INPUT, 0) /* (D20) I2C0_SCL */ > + AM65X_IOPAD(0x0004, PIN_INPUT, 0) /* (C21) I2C0_SDA */ > + >; > + }; > + > + main_i2c1_pins_default: main-i2c1-pins-default { > + pinctrl-single,pins = < > + AM65X_IOPAD(0x0008, PIN_INPUT, 0) /* (B21) I2C1_SCL */ > + AM65X_IOPAD(0x000c, PIN_INPUT, 0) /* (E21) I2C1_SDA */ > + >; > + }; > }; > > &wkup_uart0 { > @@ -55,3 +87,41 @@ > pinctrl-names = "default"; > pinctrl-0 = <&main_uart0_pins_default>; > }; > + > +&wkup_i2c0 { > + pinctrl-names = "default"; > + pinctrl-0 = <&wkup_i2c0_pins_default>; > + clock-frequency = <400000>; > + > + pca9554: gpio@39 { > + compatible = "nxp,pca9554"; > + reg = <0x39>; > + gpio-controller; > + #gpio-cells = <2>; Do make sure that defconfig has the GPIO expander built as modules at the very least. > + }; > +}; > + > +&main_i2c0 { > + pinctrl-names = "default"; > + pinctrl-0 = <&main_i2c0_pins_default>; > + clock-frequency = <400000>; > + > + pca9555: gpio@21 { > + compatible = "nxp,pca9555"; > + reg = <0x21>; > + gpio-controller; > + #gpio-cells = <2>; > + }; > +}; > + > +&main_i2c1 { > + pinctrl-names = "default"; > + pinctrl-0 = <&main_i2c1_pins_default>; > + clock-frequency = <400000>; > +}; > + > +&main_i2c2 { > + pinctrl-names = "default"; > + pinctrl-0 = <&main_i2c2_pins_default>; > + clock-frequency = <400000>; > +}; > -- > 2.19.1 > Acked-by: Nishanth Menon <[email protected]> -- Regards, Nishanth Menon
