Hi Yasha,
except the few details below, the driver looks good to me. On 01/10/2018 12:29, Yasha Cherikovsky wrote: > The Realtek RTL8186 SoC is a MIPS based SoC > used in some home routers [1][2]. > > This adds a driver to handle the built-in timers > on this SoC. > > Timers 0 and 1 are 24bit timers. > Timers 2 and 3 are 32bit timers. > > Use Timer2 as clocksource and Timer3 for clockevents. > Timer2 is also used for sched_clock. > > [1] https://www.linux-mips.org/wiki/Realtek_SOC#Realtek_RTL8186 > [2] https://wikidevi.com/wiki/Realtek_RTL8186 > > Signed-off-by: Yasha Cherikovsky <[email protected]> > Cc: Ralf Baechle <[email protected]> > Cc: Paul Burton <[email protected]> > Cc: James Hogan <[email protected]> > Cc: Daniel Lezcano <[email protected]> > Cc: Thomas Gleixner <[email protected]> > Cc: Rob Herring <[email protected]> > Cc: Mark Rutland <[email protected]> > Cc: [email protected] > Cc: [email protected] > Cc: [email protected] > --- > drivers/clocksource/Kconfig | 9 ++ > drivers/clocksource/Makefile | 1 + > drivers/clocksource/timer-rtl8186.c | 220 ++++++++++++++++++++++++++++ > 3 files changed, 230 insertions(+) > create mode 100644 drivers/clocksource/timer-rtl8186.c > > diff --git a/drivers/clocksource/Kconfig b/drivers/clocksource/Kconfig > index dec0dd88ec15..da87f73d0631 100644 > --- a/drivers/clocksource/Kconfig > +++ b/drivers/clocksource/Kconfig > @@ -609,4 +609,13 @@ config ATCPIT100_TIMER > help > This option enables support for the Andestech ATCPIT100 timers. > > +config RTL8186_TIMER > + bool "RTL8186 timer driver" > + depends on MACH_RTL8186 > + depends on COMMON_CLK > + select TIMER_OF > + select CLKSRC_MMIO > + help > + Enables support for the RTL8186 timer driver. > + Please, convert this entry like the MTK_TIMER or the SPRD_TIMER. > endmenu > diff --git a/drivers/clocksource/Makefile b/drivers/clocksource/Makefile > index 00caf37e52f9..734e8566e1b6 100644 > --- a/drivers/clocksource/Makefile > +++ b/drivers/clocksource/Makefile > @@ -78,3 +78,4 @@ obj-$(CONFIG_H8300_TPU) += h8300_tpu.o > obj-$(CONFIG_CLKSRC_ST_LPC) += clksrc_st_lpc.o > obj-$(CONFIG_X86_NUMACHIP) += numachip.o > obj-$(CONFIG_ATCPIT100_TIMER) += timer-atcpit100.o > +obj-$(CONFIG_RTL8186_TIMER) += timer-rtl8186.o > diff --git a/drivers/clocksource/timer-rtl8186.c > b/drivers/clocksource/timer-rtl8186.c > new file mode 100644 > index 000000000000..47ef4b09ad27 > --- /dev/null > +++ b/drivers/clocksource/timer-rtl8186.c > @@ -0,0 +1,220 @@ > +// SPDX-License-Identifier: GPL-2.0 > +/* > + * Realtek RTL8186 SoC timer driver. > + * > + * Timer0 (24bit): Unused > + * Timer1 (24bit): Unused > + * Timer2 (32bit): Used as clocksource > + * Timer3 (32bit): Used as clock event device > + * > + * Copyright (C) 2018 Yasha Cherikovsky > + */ > + > +#include <linux/init.h> > +#include <linux/clockchips.h> > +#include <linux/clocksource.h> > +#include <linux/interrupt.h> > +#include <linux/jiffies.h> > +#include <linux/sched_clock.h> > +#include <linux/of_clk.h> > +#include <linux/io.h> > + > +#include <asm/time.h> > +#include <asm/idle.h> Why do you need those 2 includes above ? > +#include "timer-of.h" > + > +/* Timer registers */ > +#define TCCNR 0x0 > +#define TCIR 0x4 > +#define TC_DATA(t) (0x10 + 4 * (t)) > +#define TC_CNT(t) (0x20 + 4 * (t)) > + > +/* TCCNR register bits */ > +#define TCCNR_TC_EN_BIT(t) BIT((t) * 2) > +#define TCCNR_TC_MODE_BIT(t) BIT((t) * 2 + 1) > +#define TCCNR_TC_SRC_BIT(t) BIT((t) + 8) > + > +/* TCIR register bits */ > +#define TCIR_TC_IE_BIT(t) BIT(t) > +#define TCIR_TC_IP_BIT(t) BIT((t) + 4) > + > + > +/* Forward declaration */ > +static struct timer_of to; > + > +static void __iomem *base; > + > + nit: extra line > +#define RTL8186_TIMER_MODE_COUNTER 0 > +#define RTL8186_TIMER_MODE_TIMER 1 > + [ ... ] Thanks -- Daniel -- <http://www.linaro.org/> Linaro.org │ Open source software for ARM SoCs Follow Linaro: <http://www.facebook.com/pages/Linaro> Facebook | <http://twitter.com/#!/linaroorg> Twitter | <http://www.linaro.org/linaro-blog/> Blog
