4.9-stable review patch. If anyone has any objections, please let me know.
------------------ From: Phil Elwell <[email protected]> commit 760db29bdc97b73ff60b091315ad787b1deb5cf5 upstream. There is a standard mechanism for locating and using a MAC address from the Device Tree. Use this facility in the lan78xx driver to support applications without programmed EEPROM or OTP. At the same time, regularise the handling of the different address sources. Signed-off-by: Phil Elwell <[email protected]> Signed-off-by: David S. Miller <[email protected]> Tested-by: Paolo Pisati <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]> --- drivers/net/usb/lan78xx.c | 42 ++++++++++++++++++++---------------------- 1 file changed, 20 insertions(+), 22 deletions(-) --- a/drivers/net/usb/lan78xx.c +++ b/drivers/net/usb/lan78xx.c @@ -31,6 +31,7 @@ #include <linux/mdio.h> #include <net/ip6_checksum.h> #include <linux/microchipphy.h> +#include <linux/of_net.h> #include "lan78xx.h" #define DRIVER_AUTHOR "WOOJUNG HUH <[email protected]>" @@ -1644,34 +1645,31 @@ static void lan78xx_init_mac_address(str addr[5] = (addr_hi >> 8) & 0xFF; if (!is_valid_ether_addr(addr)) { - /* reading mac address from EEPROM or OTP */ - if ((lan78xx_read_eeprom(dev, EEPROM_MAC_OFFSET, ETH_ALEN, - addr) == 0) || - (lan78xx_read_otp(dev, EEPROM_MAC_OFFSET, ETH_ALEN, - addr) == 0)) { - if (is_valid_ether_addr(addr)) { - /* eeprom values are valid so use them */ - netif_dbg(dev, ifup, dev->net, - "MAC address read from EEPROM"); - } else { - /* generate random MAC */ - random_ether_addr(addr); - netif_dbg(dev, ifup, dev->net, - "MAC address set to random addr"); - } - - addr_lo = addr[0] | (addr[1] << 8) | - (addr[2] << 16) | (addr[3] << 24); - addr_hi = addr[4] | (addr[5] << 8); - - ret = lan78xx_write_reg(dev, RX_ADDRL, addr_lo); - ret = lan78xx_write_reg(dev, RX_ADDRH, addr_hi); + if (!eth_platform_get_mac_address(&dev->udev->dev, addr)) { + /* valid address present in Device Tree */ + netif_dbg(dev, ifup, dev->net, + "MAC address read from Device Tree"); + } else if (((lan78xx_read_eeprom(dev, EEPROM_MAC_OFFSET, + ETH_ALEN, addr) == 0) || + (lan78xx_read_otp(dev, EEPROM_MAC_OFFSET, + ETH_ALEN, addr) == 0)) && + is_valid_ether_addr(addr)) { + /* eeprom values are valid so use them */ + netif_dbg(dev, ifup, dev->net, + "MAC address read from EEPROM"); } else { /* generate random MAC */ random_ether_addr(addr); netif_dbg(dev, ifup, dev->net, "MAC address set to random addr"); } + + addr_lo = addr[0] | (addr[1] << 8) | + (addr[2] << 16) | (addr[3] << 24); + addr_hi = addr[4] | (addr[5] << 8); + + ret = lan78xx_write_reg(dev, RX_ADDRL, addr_lo); + ret = lan78xx_write_reg(dev, RX_ADDRH, addr_hi); } ret = lan78xx_write_reg(dev, MAF_LO(0), addr_lo);
