Quoting Jeffrey Hugo (2018-12-03 08:08:46)
> On 12/3/2018 8:55 AM, Bjorn Andersson wrote:
> > On Mon 03 Dec 07:34 PST 2018, Jeffrey Hugo wrote:
> >
> >> The offsets for the defined BCR reset registers does not match the hardware
> >> documentation. Update the values to match the hardware documentation.
> >>
> >
> > Sorry for not spotting this before.
> >
> >> Fixes: b5f5f525c547 (clk: qcom: Add MSM8998 Global Clock Control (GCC)
> >> driver)
> >> Signed-off-by: Jeffrey Hugo <jh...@codeaurora.org>
> >> ---
> >> drivers/clk/qcom/gcc-msm8998.c | 38
> >> +++++++++++++++++++-------------------
> >> 1 file changed, 19 insertions(+), 19 deletions(-)
> >>
> >> diff --git a/drivers/clk/qcom/gcc-msm8998.c
> >> b/drivers/clk/qcom/gcc-msm8998.c
> >> index 9f0ae40..01cc555 100644
> >> --- a/drivers/clk/qcom/gcc-msm8998.c
> >> +++ b/drivers/clk/qcom/gcc-msm8998.c
> >> @@ -2742,25 +2742,25 @@ enum {
> >> };
> >>
> >> static const struct qcom_reset_map gcc_msm8998_resets[] = {
> >> - [GCC_BLSP1_QUP1_BCR] = { 0x102400 },
> >> - [GCC_BLSP1_QUP2_BCR] = { 0x110592 },
> >> - [GCC_BLSP1_QUP3_BCR] = { 0x118784 },
> >> - [GCC_BLSP1_QUP4_BCR] = { 0x126976 },
> >> - [GCC_BLSP1_QUP5_BCR] = { 0x135168 },
> >> - [GCC_BLSP1_QUP6_BCR] = { 0x143360 },
> >> - [GCC_BLSP2_QUP1_BCR] = { 0x155648 },
> >> - [GCC_BLSP2_QUP2_BCR] = { 0x163840 },
> >> - [GCC_BLSP2_QUP3_BCR] = { 0x172032 },
> >> - [GCC_BLSP2_QUP4_BCR] = { 0x180224 },
> >> - [GCC_BLSP2_QUP5_BCR] = { 0x188416 },
> >> - [GCC_BLSP2_QUP6_BCR] = { 0x196608 },
> >> - [GCC_PCIE_0_BCR] = { 0x438272 },
> >> - [GCC_PDM_BCR] = { 0x208896 },
> >> - [GCC_SDCC2_BCR] = { 0x81920 },
> >> - [GCC_SDCC4_BCR] = { 0x90112 },
> >> - [GCC_TSIF_BCR] = { 0x221184 },
> >> - [GCC_UFS_BCR] = { 0x479232 },
> >> - [GCC_USB_30_BCR] = { 0x61440 },
> >> + [GCC_BLSP1_QUP1_BCR] = { 0x19000 },
> >> + [GCC_BLSP1_QUP2_BCR] = { 0x1b000 },
> >> + [GCC_BLSP1_QUP3_BCR] = { 0x1d000 },
> >> + [GCC_BLSP1_QUP4_BCR] = { 0x1f000 },
> >> + [GCC_BLSP1_QUP5_BCR] = { 0x21000 },
> >> + [GCC_BLSP1_QUP6_BCR] = { 0x23000 },
> >> + [GCC_BLSP2_QUP1_BCR] = { 0x26000 },
> >> + [GCC_BLSP2_QUP2_BCR] = { 0x28000 },
> >> + [GCC_BLSP2_QUP3_BCR] = { 0x2a000 },
> >> + [GCC_BLSP2_QUP4_BCR] = { 0x2c000 },
> >> + [GCC_BLSP2_QUP5_BCR] = { 0x2e000 },
> >> + [GCC_BLSP2_QUP6_BCR] = { 0x30000 },
> >> + [GCC_PCIE_0_BCR] = { 0x6c01c },
> >
> > I find GCC_PCIE_0_BCR at 0x6b000 and then GCC_PCIE_0_PHY_BCR at 0x6c01c.
>
> Doh. Thanks for the double check. GCC_PCIE_0_PHY_BCR is not defined in
> include/dt-bindings/clock/qcom,gcc-msm8998.h so I plan to leave it out
> until later.
>
> Expect a v2 shortly.
Will you add GCC_PCIE0_PHY_BCR shortly so we don't have to add it later
on when it becomes critical?
