Hi, On 05/12/18 12:31 PM, Vivek Gautam wrote: > On Tue, Oct 23, 2018 at 10:07 AM Can Guo <c...@codeaurora.org> wrote: >> >> This patch series adds support for UFS QMP PHY on SDM845 and the >> compatible string for it. This patch series depends on the current >> proposed QMP V3 USB3 UNI PHY support for sdm845 driver [1], on >> the DT bindings for the QMP V3 USB3 PHYs based dirver [2], and also >> rebased on updated pipe_clk initialization sequence [3]. This series >> can only be merged once the dependent patches do. >> [1] >> http://lists-archives.com/linux-kernel/29071659-dt-bindings-phy-qcom-qmp-update-bindings-for-sdm845.html >> [2] >> http://lists-archives.com/linux-kernel/29071660-phy-qcom-qmp-add-qmp-v3-usb3-uni-phy-support-for-sdm845.html >> [3] https://patchwork.kernel.org/patch/10376551/ > > Besides my comment for PATCH 4/6, I have already reviewed the entire series, > and it looks good. > If adding new bindings for sdm845 needs a further review, can you separate out > just the phy patches from this series (patch 1, 2, 3 & 6), and re-send them. > We can ask Kishon if he can pull them in for this merge window. > Thanks.
Looks like the PHY patches has gone in the previous merge window itself. If there are any changes, please post only the diff as a separate patch. Thanks Kishon > > best regards > Vivek > >> >> Changes since v9: >> - Incorporated review comments from Rob. >> >> Changes since v8: >> - Add one new change to support ufs core reset. >> - Incorporated review comments from Evan, Vivek. >> >> Changes since v7: >> - Add one new change to update UFS PHY power on sequence >> - Incorporated review comments from Evan, Vivek and Manu. >> >> Changes since v6: >> - Add one new change to clean up some structs and field >> - Updates the PHY power control sequence. >> - Incorporated review comments from Vivek and Manu. >> >> Changes since v5: >> - Updates the PHY power control sequence. >> - Updates UFS PHY power on condition check. >> >> Changes since v4: >> - Adds 'ref_aux' clock back to SDM845 UFS PHY clock list. >> - Power on PHY before serdes configuration starts. >> - Updates the UFS PHY initialization sequence. >> - Updates a few UFS PHY registers. >> - Incorporated review comments from Vivek and Manu. >> >> Changes since v3: >> - Incorporated review comments from Vivek and Rob. >> >> Changes since v2: >> - Incorporated review comments from Vivek and Rob. >> - Remove "ref_aux" from sdm845 ufs phy clock list structure. >> >> Changes since v1: >> - Incorporated review comments from Vivek and Manu. >> - Update the commit title of patch 2. >> >> Can Guo (5): >> phy: Update PHY power control sequence >> phy: General struct and field cleanup >> phy: Add QMP phy based UFS phy support for sdm845 >> scsi: ufs: Power on phy after it is initialized >> dt-bindings: phy-qcom-qmp: Add UFS phy compatible string for sdm845 >> >> Dov Levenglick (1): >> scsi: ufs: Add core reset support >> >> .../devicetree/bindings/phy/qcom-qmp-phy.txt | 4 +- >> drivers/phy/qualcomm/phy-qcom-qmp.c | 216 >> +++++++++++++++++++-- >> drivers/phy/qualcomm/phy-qcom-qmp.h | 15 ++ >> drivers/scsi/ufs/ufs-qcom.c | 34 +++- >> drivers/scsi/ufs/ufs-qcom.h | 1 + >> drivers/scsi/ufs/ufshcd-pltfrm.c | 22 +++ >> drivers/scsi/ufs/ufshcd.c | 13 ++ >> drivers/scsi/ufs/ufshcd.h | 12 ++ >> 8 files changed, 296 insertions(+), 21 deletions(-) >> >> -- >> The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum, >> a Linux Foundation Collaborative Project >> > >
