Hi Parthiban,
On Mon, Nov 26, 2018 at 07:58:21PM +0100, Parthiban Nallathambi wrote:
> Add pinctrl definitions for Actions Semiconductor S700 I2C controllers.
> Pinctrl definitions are only available for I2C0, I2C1 and I2C2.
> Enable I2C0 (PMIC), I2C1 (gyro, touchscreen) in cubieboard7.
>
> Signed-off-by: Parthiban Nallathambi <[email protected]>
> ---
> .../boot/dts/actions/s700-cubieboard7.dts | 53 +++++++++++++++++++
> 1 file changed, 53 insertions(+)
>
> diff --git a/arch/arm64/boot/dts/actions/s700-cubieboard7.dts
> b/arch/arm64/boot/dts/actions/s700-cubieboard7.dts
> index 28f3f4a0f7f0..6a75fdd7ab42 100644
> --- a/arch/arm64/boot/dts/actions/s700-cubieboard7.dts
> +++ b/arch/arm64/boot/dts/actions/s700-cubieboard7.dts
> @@ -37,3 +37,56 @@
> &uart3 {
> status = "okay";
> };
> +
> +&i2c0 {
On the board DTS, node names should be sorted alphabetically!
Regards,
Mani
> + status = "okay";
> + pinctrl-names = "default";
> + pinctrl-0 = <&i2c0_default>;
> +};
> +
> +&i2c1 {
> + status = "okay";
> + pinctrl-names = "default";
> + pinctrl-0 = <&i2c1_default>;
> +};
> +
> +&i2c2 {
> + status = "disabled";
> + pinctrl-names = "default";
> + pinctrl-0 = <&i2c2_default>;
> +};
> +
> +&pinctrl {
> + i2c0_default: i2c0_default {
> + pinmux {
> + groups = "i2c0_mfp";
> + function = "i2c0";
> + };
> + pinconf {
> + pins = "i2c0_sclk", "i2c0_sdata";
> + bias-pull-up;
> + };
> + };
> +
> + i2c1_default: i2c1_default {
> + pinmux {
> + groups = "i2c1_dummy";
> + function = "i2c1";
> + };
> + pinconf {
> + pins = "i2c1_sclk", "i2c1_sdata";
> + bias-pull-up;
> + };
> + };
> +
> + i2c2_default: i2c2_default {
> + pinmux {
> + groups = "i2c2_dummy";
> + function = "i2c2";
> + };
> + pinconf {
> + pins = "i2c2_sclk", "i2c2_sdata";
> + bias-pull-up;
> + };
> + };
> +};
> --
> 2.17.2
>
