Hi Nicolas, please change your subject to something like this:
dt-bindings: input: Add Raspberry Pi Touchscreen and also change the order of your patches. The binding always comes first. > Nicolas Saenz Julienne <[email protected]> hat am 10. Dezember 2018 um > 17:30 geschrieben: > > > Adds device tree documentation for Raspberry Pi's official 7" > touchscreen. Maybe you should mention that we need this binding for an overlay. > > Signed-off-by: Nicolas Saenz Julienne <[email protected]> > --- > .../touchscreen/raspberrypi,firmware-ts.txt | 26 +++++++++++++++++++ > 1 file changed, 26 insertions(+) > create mode 100644 > Documentation/devicetree/bindings/input/touchscreen/raspberrypi,firmware-ts.txt > > diff --git > a/Documentation/devicetree/bindings/input/touchscreen/raspberrypi,firmware-ts.txt > > b/Documentation/devicetree/bindings/input/touchscreen/raspberrypi,firmware-ts.txt > new file mode 100644 > index 000000000000..38e22eb222e9 > --- /dev/null > +++ > b/Documentation/devicetree/bindings/input/touchscreen/raspberrypi,firmware-ts.txt > @@ -0,0 +1,26 @@ > +Raspberry Pi 3 firmware based 7" touchscreen Please drop the 3 here > +===================================== > + > +Required properties: > + - compatible: "raspberrypi,firmware-ts" > + > +Optional properties: > + - firmware: Reference to RPi's firmware device node > + - touchscreen-size-x: See touchscreen.txt > + - touchscreen-size-y: See touchscreen.txt > + - touchscreen-inverted-x: See touchscreen.txt > + - touchscreen-inverted-y: See touchscreen.txt > + - touchscreen-swapped-x-y: See touchscreen.txt > + > +Example: > + > +firmware: firmware-rpi { > + compatible = "raspberrypi,bcm2835-firmware"; > + mboxes = <&mailbox>; > + > + ts: touchscreen { > + compatible = "raspberrypi,firmware-ts"; > + touchscreen-size-x = <800>; > + touchscreen-size-y = <480>; > + }; > +}; > -- > 2.19.2 >
