On Sun, 9 Dec 2018 14:26:07 +0000, Abel Vesa wrote: > From: Lucas Stach <l.st...@pengutronix.de> > > This adds the basic DTS for the i.MX8MQ. > For now only the following peripherals are supported: > - IOMUXC (pin controller) > - CCM (clock controller) > - GPIO > - UART > - uSDHC (SD/eMMC controller) > - FEC (ethernet controller) > - i2c > > This is enough to get a very basic board support up and running. > > One known limitation is that the driver for the GPC interrupt > controller is still missing, rendering the CPU sleep states unusable > as there is nothing waking them up anymore. > > Signed-off-by: Lucas Stach <l.st...@pengutronix.de> > Reviewed-by: Dong Aisheng <aisheng.d...@nxp.com> > --- > Documentation/devicetree/bindings/arm/fsl.txt | 4 + > arch/arm64/boot/dts/freescale/imx8mq-pinfunc.h | 623 > +++++++++++++++++++++++++ > arch/arm64/boot/dts/freescale/imx8mq.dtsi | 392 ++++++++++++++++ > 3 files changed, 1019 insertions(+) > create mode 100644 arch/arm64/boot/dts/freescale/imx8mq-pinfunc.h > create mode 100644 arch/arm64/boot/dts/freescale/imx8mq.dtsi >
Reviewed-by: Rob Herring <r...@kernel.org>
