From: Stefan Agner <[email protected]> This adds the devicetree bindings for the STMPE ADC. And corrects a typo in st,sample-time it is rather "6 -> 124 clocks" according to the datasheet and not 144.
Signed-off-by: Stefan Agner <[email protected]> Signed-off-by: Max Krummenacher <[email protected]> Signed-off-by: Philippe Schenker <[email protected]> --- Changes in v4: - Put reformatting in a separate precursor patch. Changes in v3: - Reformatted documentation for touchscreen to use tabs and have a better overview of the settings. - Added note which adc-settings will take precedence. - changed typo in sample-time setting from 144 clocks to 124 clocks, as stated in the datasheet. Changes in v2: - Moved the bindings for ADC to the overlying mfd. - Reformatted for better readability .../devicetree/bindings/iio/adc/stmpe-adc.txt | 21 ++++++++++++ .../bindings/input/touchscreen/stmpe.txt | 32 +++++++++---------- .../devicetree/bindings/mfd/stmpe.txt | 14 ++++++++ 3 files changed, 51 insertions(+), 16 deletions(-) create mode 100644 Documentation/devicetree/bindings/iio/adc/stmpe-adc.txt diff --git a/Documentation/devicetree/bindings/iio/adc/stmpe-adc.txt b/Documentation/devicetree/bindings/iio/adc/stmpe-adc.txt new file mode 100644 index 000000000000..480e66422625 --- /dev/null +++ b/Documentation/devicetree/bindings/iio/adc/stmpe-adc.txt @@ -0,0 +1,21 @@ +STMPE ADC driver +---------------- + +Required properties: + - compatible: "st,stmpe-adc" + +Optional properties: +Note that the ADC is shared with the STMPE touchscreen. ADC related settings +have to be done in the mfd. +- st,norequest-mask: bitmask specifying which ADC channels should _not_ be + requestable due to different usage (e.g. touch) + +Node name must be stmpe_adc and should be child node of stmpe node to +which it belongs. + +Example: + + stmpe_adc { + compatible = "st,stmpe-adc"; + st,norequest-mask = <0x0F>; /* dont use ADC CH3-0 */ + }; diff --git a/Documentation/devicetree/bindings/input/touchscreen/stmpe.txt b/Documentation/devicetree/bindings/input/touchscreen/stmpe.txt index 1d3f84308142..8e2b240882fa 100644 --- a/Documentation/devicetree/bindings/input/touchscreen/stmpe.txt +++ b/Documentation/devicetree/bindings/input/touchscreen/stmpe.txt @@ -5,18 +5,6 @@ Required properties: - compatible: "st,stmpe-ts" Optional properties: -- st,sample-time : ADC conversion time in number of clock. - 0 -> 36 clocks 4 -> 80 clocks (recommended) - 1 -> 44 clocks 5 -> 96 clocks - 2 -> 56 clocks 6 -> 144 clocks - 3 -> 64 clocks -- st,mod-12b : ADC Bit mode - 0 -> 10bit ADC 1 -> 12bit ADC -- st,ref-sel : ADC reference source - 0 -> internal 1 -> external -- st,adc-freq : ADC Clock speed - 0 -> 1.625 MHz 2 || 3 -> 6.5 MHz - 1 -> 3.25 MHz - st,ave-ctrl : Sample average control 0 -> 1 sample 1 -> 2 samples @@ -40,17 +28,29 @@ Optional properties: 0 -> 20 mA (typical 35mA max) 1 -> 50 mA (typical 80 mA max) +Optional properties common with MFD (deprecated): + - st,sample-time : ADC conversion time in number of clock. + 0 -> 36 clocks 4 -> 80 clocks (recommended) + 1 -> 44 clocks 5 -> 96 clocks + 2 -> 56 clocks 6 -> 124 clocks + 3 -> 64 clocks + - st,mod-12b : ADC Bit mode + 0 -> 10bit ADC 1 -> 12bit ADC + - st,ref-sel : ADC reference source + 0 -> internal 1 -> external + - st,adc-freq : ADC Clock speed + 0 -> 1.625 MHz 2 || 3 -> 6.5 MHz + 1 -> 3.25 MHz + Node name must be stmpe_touchscreen and should be child node of stmpe node to which it belongs. +Note that common ADC settings of stmpe_touchscreen will take precedence. + Example: stmpe_touchscreen { compatible = "st,stmpe-ts"; - st,sample-time = <4>; - st,mod-12b = <1>; - st,ref-sel = <0>; - st,adc-freq = <1>; st,ave-ctrl = <1>; st,touch-det-delay = <2>; st,settling = <2>; diff --git a/Documentation/devicetree/bindings/mfd/stmpe.txt b/Documentation/devicetree/bindings/mfd/stmpe.txt index a46e7177195d..d4408a417193 100644 --- a/Documentation/devicetree/bindings/mfd/stmpe.txt +++ b/Documentation/devicetree/bindings/mfd/stmpe.txt @@ -14,6 +14,20 @@ Optional properties: - st,autosleep-timeout : Valid entries (ms); 4, 16, 32, 64, 128, 256, 512 and 1024 - irq-gpio : If present, which GPIO to use for event IRQ +Optional properties for devices with touch and ADC (STMPE811|STMPE610): + - st,sample-time : ADC conversion time in number of clock. + 0 -> 36 clocks 4 -> 80 clocks (recommended) + 1 -> 44 clocks 5 -> 96 clocks + 2 -> 56 clocks 6 -> 124 clocks + 3 -> 64 clocks + - st,mod-12b : ADC Bit mode + 0 -> 10bit ADC 1 -> 12bit ADC + - st,ref-sel : ADC reference source + 0 -> internal 1 -> external + - st,adc-freq : ADC Clock speed + 0 -> 1.625 MHz 2 || 3 -> 6.5 MHz + 1 -> 3.25 MHz + Example: stmpe1601: stmpe1601@40 { -- 2.19.2
