MSI_EN of iMX PCIe RC would be asserted when
PCIEPORTBUS driver is selected.
Thus, the MSI works fine on iMX PCIe before.
Assert it unconditionally when MSI is supported.
Otherwise, the MSI wouldn't be triggered although
the EP is present and the MSIs are assigned.
Signed-off-by: Richard Zhu <hongxing....@nxp.com>
---
drivers/pci/controller/dwc/pci-imx6.c | 7 +++++++
1 file changed, 7 insertions(+)
diff --git a/drivers/pci/controller/dwc/pci-imx6.c
b/drivers/pci/controller/dwc/pci-imx6.c
index 26087b3..d3e4296 100644
--- a/drivers/pci/controller/dwc/pci-imx6.c
+++ b/drivers/pci/controller/dwc/pci-imx6.c
@@ -74,6 +74,7 @@ struct imx6_pcie {
#define PHY_PLL_LOCK_WAIT_USLEEP_MAX 200
/* PCIe Root Complex registers (memory-mapped) */
+#define PCI_MSI_CAP 0x50
#define PCIE_RC_LCR 0x7c
#define PCIE_RC_LCR_MAX_LINK_SPEEDS_GEN1 0x1
#define PCIE_RC_LCR_MAX_LINK_SPEEDS_GEN2 0x2
@@ -926,6 +927,7 @@ static int imx6_pcie_probe(struct platform_device *pdev)
struct resource *dbi_base;
struct device_node *node = dev->of_node;
int ret;
+ u16 val;
imx6_pcie = devm_kzalloc(dev, sizeof(*imx6_pcie), GFP_KERNEL);
if (!imx6_pcie)
@@ -1070,6 +1072,11 @@ static int imx6_pcie_probe(struct platform_device *pdev)
ret = imx6_add_pcie_port(imx6_pcie, pdev);
if (ret < 0)
return ret;
+ if (IS_ENABLED(CONFIG_PCI_MSI)) {
+ val = dw_pcie_readw_dbi(pci, PCI_MSI_CAP + PCI_MSI_FLAGS);
+ val |= PCI_MSI_FLAGS_ENABLE;
+ dw_pcie_writew_dbi(pci, PCI_MSI_CAP + PCI_MSI_FLAGS, val);
+ }
return 0;
}
--
2.7.4
