On Fri, Dec 21, 2018 at 11:44:23PM +0530, Taniya Das wrote: > This change adds the cpufreq node as per the bindings example for SDM845. > > Signed-off-by: Taniya Das <[email protected]> > Tested-by: Matthias Kaehlcke <[email protected]> > --- > arch/arm64/boot/dts/qcom/sdm845.dtsi | 19 +++++++++++++++++++ > 1 file changed, 19 insertions(+) > > diff --git a/arch/arm64/boot/dts/qcom/sdm845.dtsi > b/arch/arm64/boot/dts/qcom/sdm845.dtsi > index 23a253b..a69a21e 100644 > --- a/arch/arm64/boot/dts/qcom/sdm845.dtsi > +++ b/arch/arm64/boot/dts/qcom/sdm845.dtsi > @@ -99,6 +99,7 @@ > compatible = "qcom,kryo385"; > reg = <0x0 0x0>; > enable-method = "psci"; > + qcom,freq-domain = <&cpufreq_hw 0>; > next-level-cache = <&L2_0>; > L2_0: l2-cache { > compatible = "cache"; > @@ -114,6 +115,7 @@ > compatible = "qcom,kryo385"; > reg = <0x0 0x100>; > enable-method = "psci"; > + qcom,freq-domain = <&cpufreq_hw 0>; > next-level-cache = <&L2_100>; > L2_100: l2-cache { > compatible = "cache"; > @@ -126,6 +128,7 @@ > compatible = "qcom,kryo385"; > reg = <0x0 0x200>; > enable-method = "psci"; > + qcom,freq-domain = <&cpufreq_hw 0>; > next-level-cache = <&L2_200>; > L2_200: l2-cache { > compatible = "cache"; > @@ -138,6 +141,7 @@ > compatible = "qcom,kryo385"; > reg = <0x0 0x300>; > enable-method = "psci"; > + qcom,freq-domain = <&cpufreq_hw 0>; > next-level-cache = <&L2_300>; > L2_300: l2-cache { > compatible = "cache"; > @@ -150,6 +154,7 @@ > compatible = "qcom,kryo385"; > reg = <0x0 0x400>; > enable-method = "psci"; > + qcom,freq-domain = <&cpufreq_hw 1>; > next-level-cache = <&L2_400>; > L2_400: l2-cache { > compatible = "cache"; > @@ -162,6 +167,7 @@ > compatible = "qcom,kryo385"; > reg = <0x0 0x500>; > enable-method = "psci"; > + qcom,freq-domain = <&cpufreq_hw 1>; > next-level-cache = <&L2_500>; > L2_500: l2-cache { > compatible = "cache"; > @@ -174,6 +180,7 @@ > compatible = "qcom,kryo385"; > reg = <0x0 0x600>; > enable-method = "psci"; > + qcom,freq-domain = <&cpufreq_hw 1>; > next-level-cache = <&L2_600>; > L2_600: l2-cache { > compatible = "cache"; > @@ -186,6 +193,7 @@ > compatible = "qcom,kryo385"; > reg = <0x0 0x700>; > enable-method = "psci"; > + qcom,freq-domain = <&cpufreq_hw 1>; > next-level-cache = <&L2_700>; > L2_700: l2-cache { > compatible = "cache"; > @@ -1686,6 +1694,17 @@ > status = "disabled"; > }; > }; > + > + cpufreq_hw: cpufreq@17d43000 { > + compatible = "qcom,cpufreq-hw"; > + reg = <0x17d43000 0x1400>, <0x17d45800 0x1400>; > + reg-names = "freq-domain0", "freq-domain1"; > + > + clocks = <&rpmhcc RPMH_CXO_CLK>, <&gcc GPLL0>; > + clock-names = "xo", "alternate"; > + > + #freq-domain-cells = <1>; > + }; > }; > > thermal-zones {
Reviewed-by: Matthias Kaehlcke <[email protected]> Thanks Matthias
