After sending a sysmon shutdown request to the SSCTL service on the
subsystem, wait for the service to send shutdown-ack interrupt or
an indication message to signal the completion of graceful shutdown.

Signed-off-by: Sibi Sankar <si...@codeaurora.org>
---
 drivers/remoteproc/qcom_sysmon.c | 40 +++++++++++++++++++++++++++++++-
 1 file changed, 39 insertions(+), 1 deletion(-)

diff --git a/drivers/remoteproc/qcom_sysmon.c b/drivers/remoteproc/qcom_sysmon.c
index c0d6ee8de995..0da83638ca99 100644
--- a/drivers/remoteproc/qcom_sysmon.c
+++ b/drivers/remoteproc/qcom_sysmon.c
@@ -36,6 +36,7 @@ struct qcom_sysmon {
 
        struct rpmsg_endpoint *ept;
        struct completion comp;
+       struct completion ind_comp;
        struct mutex lock;
 
        bool ssr_ack;
@@ -139,6 +140,7 @@ static int sysmon_callback(struct rpmsg_device *rpdev, void 
*data, int count,
 }
 
 #define SSCTL_SHUTDOWN_REQ             0x21
+#define SSCTL_SHUTDOWN_READY_IND       0x21
 #define SSCTL_SUBSYS_EVENT_REQ         0x23
 
 #define SSCTL_MAX_MSG_LEN              7
@@ -254,6 +256,29 @@ static struct qmi_elem_info ssctl_subsys_event_resp_ei[] = 
{
        {}
 };
 
+static struct qmi_elem_info ssctl_shutdown_ind_ei[] = {
+       {}
+};
+
+static void sysmon_ind_cb(struct qmi_handle *qmi, struct sockaddr_qrtr *sq,
+                         struct qmi_txn *txn, const void *data)
+{
+       struct qcom_sysmon *sysmon = container_of(qmi, struct qcom_sysmon, qmi);
+
+       complete(&sysmon->ind_comp);
+}
+
+static struct qmi_msg_handler qmi_indication_handler[] = {
+       {
+               .type = QMI_INDICATION,
+               .msg_id = SSCTL_SHUTDOWN_READY_IND,
+               .ei = ssctl_shutdown_ind_ei,
+               .decoded_size = 0,
+               .fn = sysmon_ind_cb
+       },
+       {}
+};
+
 /**
  * ssctl_request_shutdown() - request shutdown via SSCTL QMI service
  * @sysmon:    sysmon context
@@ -264,6 +289,7 @@ static void ssctl_request_shutdown(struct qcom_sysmon 
*sysmon)
        struct qmi_txn txn;
        int ret;
 
+       reinit_completion(&sysmon->ind_comp);
        ret = qmi_txn_init(&sysmon->qmi, &txn, ssctl_shutdown_resp_ei, &resp);
        if (ret < 0) {
                dev_err(sysmon->dev, "failed to allocate QMI txn\n");
@@ -285,6 +311,16 @@ static void ssctl_request_shutdown(struct qcom_sysmon 
*sysmon)
                dev_err(sysmon->dev, "shutdown request failed\n");
        else
                dev_dbg(sysmon->dev, "shutdown request completed\n");
+
+       if (sysmon->q6v5) {
+               ret = qcom_q6v5_wait_for_shutdown(sysmon->q6v5, 10 * HZ);
+               if (ret) {
+                       ret = try_wait_for_completion(&sysmon->ind_comp);
+                       if (!ret)
+                               dev_err(sysmon->dev,
+                                       "timeout waiting for shutdown ack\n");
+               }
+       }
 }
 
 /**
@@ -462,9 +498,11 @@ struct qcom_sysmon *qcom_add_sysmon_subdev(struct rproc 
*rproc,
        sysmon->q6v5 = q6v5;
 
        init_completion(&sysmon->comp);
+       init_completion(&sysmon->ind_comp);
        mutex_init(&sysmon->lock);
 
-       ret = qmi_handle_init(&sysmon->qmi, SSCTL_MAX_MSG_LEN, &ssctl_ops, 
NULL);
+       ret = qmi_handle_init(&sysmon->qmi, SSCTL_MAX_MSG_LEN, &ssctl_ops,
+                             qmi_indication_handler);
        if (ret < 0) {
                dev_err(sysmon->dev, "failed to initialize qmi handle\n");
                kfree(sysmon);
-- 
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
a Linux Foundation Collaborative Project

Reply via email to