Add support for altr,pcie-root-port-2.0.
Signed-off-by: Ley Foon Tan <ley.foon....@intel.com>
---
.../devicetree/bindings/pci/altera-pcie.txt | 4 +++-
1 files changed, 3 insertions(+), 1 deletions(-)
mode change 100644 => 100755
Documentation/devicetree/bindings/pci/altera-pcie.txt
diff --git a/Documentation/devicetree/bindings/pci/altera-pcie.txt
b/Documentation/devicetree/bindings/pci/altera-pcie.txt
old mode 100644
new mode 100755
index 6c396f1..816b244
--- a/Documentation/devicetree/bindings/pci/altera-pcie.txt
+++ b/Documentation/devicetree/bindings/pci/altera-pcie.txt
@@ -1,11 +1,13 @@
* Altera PCIe controller
Required properties:
-- compatible : should contain "altr,pcie-root-port-1.0"
+- compatible : should contain "altr,pcie-root-port-1.0" or
"altr,pcie-root-port-2.0"
- reg: a list of physical base address and length for TXS and CRA.
+ For "altr,pcie-root-port-2.0", additional HIP base address and
length.
- reg-names: must include the following entries:
"Txs": TX slave port region
"Cra": Control register access region
+ "Hip": Hard IP region (if "altr,pcie-root-port-2.0")
- interrupts: specifies the interrupt source of the parent interrupt
controller. The format of the interrupt specifier depends
on the parent interrupt controller.
--
1.7.1
