>> hangs. If I try it after a reboot with 'mcelog --k8 >> --ascii' or whatever parameter, there is no output at > You could type error back in from the email ?
Ok I copied it into the tool, it gives me: CPU 0 4 northbridge TSC b7d4a144d0 Northbridge ECC error ECC syndrome = 0 STATUS 0 MCGSTATUS 4 This is a bit strange because I repeatedly tested the RAM yesterday and it gives no problems. And even more interesting: the error occurs at a reproducible moment: when reading the bad sector from the Seagate harddisk. And with an older kernel I was able to just copy all stuff from the drive using dd_rescue... I do not have ECC RAM in my PC by the way. > > Isn't it strange to say that the controller does > > something bad if there is just a bad sector on the > > drive that is reported and handled correctly in an > > older kernel > Not really. Its very strange it gives an MCE at all > but this is a known > failure path (and should be a fixed known failure > path) for the Nvidia SATA. So how to proceed in tackling this problem now? Is there anything I can do to (help you guys ;)) fix it? At this moment it unfortunately does not look to me as a fixed failure path... ____________________________________________________________________________________ Take the Internet to Go: Yahoo!Go puts the Internet in your pocket: mail, news, photos & more. http://mobile.yahoo.com/go?refer=1GNXIC - To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to [EMAIL PROTECTED] More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/