On Sun, Jan 06, 2019 at 06:16:14PM +0100, Tomasz Duszynski wrote:
> Add device tree support for Plantower PMS7003 particulate matter sensor.
>
> Signed-off-by: Tomasz Duszynski <[email protected]>
> ---
> .../bindings/iio/chemical/plantower,pms7003.txt | 14 ++++++++++++++
> 1 file changed, 14 insertions(+)
> create mode 100644
> Documentation/devicetree/bindings/iio/chemical/plantower,pms7003.txt
>
> diff --git
> a/Documentation/devicetree/bindings/iio/chemical/plantower,pms7003.txt
> b/Documentation/devicetree/bindings/iio/chemical/plantower,pms7003.txt
> new file mode 100644
> index 000000000000..79eb538eb932
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/iio/chemical/plantower,pms7003.txt
> @@ -0,0 +1,14 @@
> +* Plantower PMS7003 particulate matter sensor
> +
> +Required properties:
> +- compatible: must be "plantower,pms7003"
Looks like this has reset and set GPIO lines as well as Vcc supply.
Bindings should be complete even if the driver or a platform doesn't use
some parts.
> +
> +Refer to serial/slave-device.txt for generic serial attached device bindings.
> +
> +Example:
> +
> +&uart@0 {
> + pms7003 {
> + compatible = "plantower,pms7003";
> + };
> +};
> --
> 2.20.1
>
