On Thursday 03 January 2019 07:17 PM, Christian Hohnstaedt wrote:
> These options apply to all regulators in this chip.
> 
> ti,strict-supply-voltage-supervision:
>   Set STRICT flag in CONFIG1
> ti,under-voltage-limit-microvolt:
>   Select 2.75, 2.95, 3.25 or 3.35 V UVLO in CONFIG1
> ti,under-voltage-hyst-microvolt:
>   Select 200mV or 400mV UVLOHYS in CONFIG2

CHECK: Alignment should match open parenthesis
#146: FILE: drivers/mfd/tps65218.c:219:
+       if (of_property_read_u32(tps->dev->of_node,
+                       "ti,strict-supply-voltage-supervision", &strict))

CHECK: Alignment should match open parenthesis
#156: FILE: drivers/mfd/tps65218.c:229:
+       tps65218_update_bits(tps, TPS65218_REG_CONFIG1,
+               TPS65218_CONFIG1_STRICT,

CHECK: Alignment should match open parenthesis
#166: FILE: drivers/mfd/tps65218.c:239:
+       if (of_property_read_u32(tps->dev->of_node,
+                       "ti,under-voltage-hyst-microvolt", &hyst))

CHECK: Alignment should match open parenthesis
#176: FILE: drivers/mfd/tps65218.c:249:
+       tps65218_update_bits(tps, TPS65218_REG_CONFIG2,
+               TPS65218_CONFIG2_UVLOHYS,

CHECK: Alignment should match open parenthesis
#188: FILE: drivers/mfd/tps65218.c:261:
+       if (of_property_read_u32(tps->dev->of_node,
+                        "ti,under-voltage-limit-microvolt", &uvlo))

CHECK: Alignment should match open parenthesis
#211: FILE: drivers/mfd/tps65218.c:284:
+       tps65218_update_bits(tps, TPS65218_REG_CONFIG1,
+               TPS65218_CONFIG1_UVLO_MASK, uvloval,

Some checkpatch warnings to be fixed.

Other than that i tested your patch on am437x-gp-evm for boot and 
suspend/resume.

After fixing them you can add my:

Tested-by: Keerthy <j-keer...@ti.com>
Reviewed-by: Keerthy <j-keer...@ti.com>

> 
> Signed-off-by: Christian Hohnstaedt <christian.hohnsta...@wago.com>
> ---
>  drivers/mfd/tps65218.c       | 87 
> ++++++++++++++++++++++++++++++++++++++++++++
>  include/linux/mfd/tps65218.h |  4 ++
>  2 files changed, 91 insertions(+)
> 
> diff --git a/drivers/mfd/tps65218.c b/drivers/mfd/tps65218.c
> index 8bcdecf..b5e0f3a 100644
> --- a/drivers/mfd/tps65218.c
> +++ b/drivers/mfd/tps65218.c
> @@ -211,6 +211,81 @@ static const struct of_device_id 
> of_tps65218_match_table[] = {
>  };
>  MODULE_DEVICE_TABLE(of, of_tps65218_match_table);
>  
> +static int tps65218_voltage_set_strict(struct tps65218 *tps)
> +{
> +     u32 strict;
> +
> +     if (of_property_read_u32(tps->dev->of_node,
> +                     "ti,strict-supply-voltage-supervision", &strict))
> +             return 0;
> +
> +     if (strict != 0 && strict != 1) {
> +             dev_err(tps->dev,
> +                     "Invalid ti,strict-supply-voltage-supervision value\n");
> +             return -EINVAL;
> +     }
> +
> +     tps65218_update_bits(tps, TPS65218_REG_CONFIG1,
> +             TPS65218_CONFIG1_STRICT,
> +             strict ? TPS65218_CONFIG1_STRICT : 0, TPS65218_PROTECT_L1);
> +     return 0;
> +}
> +
> +static int tps65218_voltage_set_uv_hyst(struct tps65218 *tps)
> +{
> +     u32 hyst;
> +
> +     if (of_property_read_u32(tps->dev->of_node,
> +                     "ti,under-voltage-hyst-microvolt", &hyst))
> +             return 0;
> +
> +     if (hyst != 400000 && hyst != 200000) {
> +             dev_err(tps->dev,
> +                     "Invalid ti,under-voltage-hyst-microvolt value\n");
> +             return -EINVAL;
> +     }
> +
> +     tps65218_update_bits(tps, TPS65218_REG_CONFIG2,
> +             TPS65218_CONFIG2_UVLOHYS,
> +             hyst == 400000 ? TPS65218_CONFIG2_UVLOHYS : 0,
> +             TPS65218_PROTECT_L1);
> +     return 0;
> +}
> +
> +static int tps65218_voltage_set_uvlo(struct tps65218 *tps)
> +{
> +     u32 uvlo;
> +     int uvloval;
> +
> +     if (of_property_read_u32(tps->dev->of_node,
> +                      "ti,under-voltage-limit-microvolt", &uvlo))
> +             return 0;
> +
> +     switch (uvlo) {
> +     case 2750000:
> +             uvloval = TPS65218_CONFIG1_UVLO_2750000;
> +             break;
> +     case 2950000:
> +             uvloval = TPS65218_CONFIG1_UVLO_2950000;
> +             break;
> +     case 3250000:
> +             uvloval = TPS65218_CONFIG1_UVLO_3250000;
> +             break;
> +     case 3350000:
> +             uvloval = TPS65218_CONFIG1_UVLO_3350000;
> +             break;
> +     default:
> +             dev_err(tps->dev,
> +                     "Invalid ti,under-voltage-limit-microvolt value\n");
> +             return -EINVAL;
> +     }
> +
> +     tps65218_update_bits(tps, TPS65218_REG_CONFIG1,
> +             TPS65218_CONFIG1_UVLO_MASK, uvloval,
> +             TPS65218_PROTECT_L1);
> +     return 0;
> +}
> +
>  static int tps65218_probe(struct i2c_client *client,
>                               const struct i2c_device_id *ids)
>  {
> @@ -249,6 +324,18 @@ static int tps65218_probe(struct i2c_client *client,
>  
>       tps->rev = chipid & TPS65218_CHIPID_REV_MASK;
>  
> +     ret = tps65218_voltage_set_strict(tps);
> +     if (ret)
> +             return ret;
> +
> +     ret = tps65218_voltage_set_uvlo(tps);
> +     if (ret)
> +             return ret;
> +
> +     ret = tps65218_voltage_set_uv_hyst(tps);
> +     if (ret)
> +             return ret;
> +
>       ret = mfd_add_devices(tps->dev, PLATFORM_DEVID_AUTO, tps65218_cells,
>                             ARRAY_SIZE(tps65218_cells), NULL, 0,
>                             regmap_irq_get_domain(tps->irq_data));
> diff --git a/include/linux/mfd/tps65218.h b/include/linux/mfd/tps65218.h
> index c204d9a..3cbe103 100644
> --- a/include/linux/mfd/tps65218.h
> +++ b/include/linux/mfd/tps65218.h
> @@ -137,6 +137,10 @@
>  #define TPS65218_CONFIG1_PGDLY_MASK  0x18
>  #define TPS65218_CONFIG1_STRICT              BIT(2)
>  #define TPS65218_CONFIG1_UVLO_MASK   0x3
> +#define TPS65218_CONFIG1_UVLO_2750000        0x0
> +#define TPS65218_CONFIG1_UVLO_2950000        0x1
> +#define TPS65218_CONFIG1_UVLO_3250000        0x2
> +#define TPS65218_CONFIG1_UVLO_3350000        0x3
>  
>  #define TPS65218_CONFIG2_DC12_RST    BIT(7)
>  #define TPS65218_CONFIG2_UVLOHYS     BIT(6)
> 

Reply via email to