Hello!
On 18.01.2019 8:54, Mason Yang wrote:
Document the bindings used by the Renesas R-Car Gen3 RPC-IF controller.
Signed-off-by: Mason Yang <masonccy...@mxic.com.tw>
---
.../devicetree/bindings/spi/spi-renesas-rpc.txt | 37 ++++++++++++++++++++++
1 file changed, 37 insertions(+)
create mode 100644 Documentation/devicetree/bindings/spi/spi-renesas-rpc.txt
diff --git a/Documentation/devicetree/bindings/spi/spi-renesas-rpc.txt
b/Documentation/devicetree/bindings/spi/spi-renesas-rpc.txt
new file mode 100644
index 0000000..9b5001e
--- /dev/null
+++ b/Documentation/devicetree/bindings/spi/spi-renesas-rpc.txt
@@ -0,0 +1,37 @@
+Renesas R-Car Gen3 RPC-IF controller Device Tree Bindings
+----------------------------------------------------------
+
+Required properties:
+- compatible: should be "renesas,rcar-gen3-rpc"
+- #address-cells: should be 1
+- #size-cells: should be 0
+- reg: should contain three register areas:
+ first for the base address of rpc-if registers,
+ second for the direct mapping read mode and
+ third for the write buffer area.
+- reg-names: should contain "regs", "dirmap" and "wbuf"
+- clock-names: should contain "rpc"
+- clocks: should contain 1 entries for the module's clock
+
+Example:
+
+ rpc: rpc@ee200000 {
+ compatible = "renesas,rcar-gen3-rpc";
+ reg = <0 0xee200000 0 0x7fff>, <0 0x08000000 0 0x4000000>,
s/0x7fff/0x8000/. -- that's size, not limit. But in reality, 0x200 would
be enough.
+ <0 0xee208000 0 0x100>;
+ reg-names = "regs", "dirmap", "<wbuf>;
Why <>?
MBR, Sergei
