On Thu, 17 Jan 2019 22:06:32 -0300 Paul Cercueil <p...@crapouillou.net> wrote:
> This should be done in devicetree. Besides, it prevents us from > supporting other SoCs which don't use the same clock frequency for the > BCH hardware. As I said earlier, I disagree with this statement, plus, you're breaking backward compat with existing DTs when doing that. > > Signed-off-by: Paul Cercueil <p...@crapouillou.net> > --- > drivers/mtd/nand/raw/jz4780_bch.c | 4 ---- > 1 file changed, 4 deletions(-) > > diff --git a/drivers/mtd/nand/raw/jz4780_bch.c > b/drivers/mtd/nand/raw/jz4780_bch.c > index 7e4e5e627603..161d3821e1c4 100644 > --- a/drivers/mtd/nand/raw/jz4780_bch.c > +++ b/drivers/mtd/nand/raw/jz4780_bch.c > @@ -57,8 +57,6 @@ > #define BCH_BHINT_UNCOR BIT(1) > #define BCH_BHINT_ERR BIT(0) > > -#define BCH_CLK_RATE (200 * 1000 * 1000) > - > /* Timeout for BCH calculation/correction. */ > #define BCH_TIMEOUT_US 100000 > > @@ -348,8 +346,6 @@ static int jz4780_bch_probe(struct platform_device *pdev) > return PTR_ERR(bch->clk); > } > > - clk_set_rate(bch->clk, BCH_CLK_RATE); > - > mutex_init(&bch->lock); > > bch->dev = dev;
