On Fri, 2019-01-18 at 14:32 +0100, Stefan Agner wrote: > Use the VDD I/O rail as phy-supply regulator. Technically, the > regulator has multiple rails, but currently the driver only > supports a single phy-supply. The VDD I/O rail has the highest > power consumption when software power down is used and hence > the highest saving potential. > > Signed-off-by: Stefan Agner <[email protected]>
Reviewed-by: Philippe Schenker <[email protected]> > --- > arch/arm/boot/dts/imx6qdl-apalis.dtsi | 1 + > 1 file changed, 1 insertion(+) > > diff --git a/arch/arm/boot/dts/imx6qdl-apalis.dtsi > b/arch/arm/boot/dts/imx6qdl-apalis.dtsi > index 0b47aecf336a..cf66f9ececbd 100644 > --- a/arch/arm/boot/dts/imx6qdl-apalis.dtsi > +++ b/arch/arm/boot/dts/imx6qdl-apalis.dtsi > @@ -241,6 +241,7 @@ > phy-handle = <ðphy>; > phy-reset-duration = <10>; > phy-reset-gpios = <&gpio1 25 GPIO_ACTIVE_LOW>; > + phy-supply = <&vgen5_reg>; > status = "okay"; > > mdio {
