On Wed, Jan 23, 2019 at 05:27:51PM +0100, Paul Menzel wrote:
> From: Corey Minyard <cminy...@mvista.com>
> Date: Thu, 15 Feb 2018 16:58:26 -0600
> 
> [ upstream commit bc48fa1b9d3b04106055b27078da824cd209865a ]
> 
> Realtek has some sort of "Virtual" IPMI device on the PCI bus as a
> KCS controller, but whatever it is, it's not one.  Ignore it if seen.
> 
> Reported-by: Chris Chiu <c...@endlessm.com>
> Signed-off-by: Corey Minyard <cminy...@mvista.com>
> Tested-by: Daniel Drake <dr...@endlessm.com>
> 
> [ Commit 13d0b35c (ipmi_si: Move PCI setup to another file) from Linux
>   4.15-rc1 has not been back ported, so the PCI code is still in
>   `drivers/char/ipmi/ipmi_si_intf.c`, requiring to apply the commit
>   manually.
> 
>   This fixes a 100 s boot delay on the HP EliteDesk 705 G4 MT with Linux
>   4.14.94. ]
> 
> Signed-off-by: Paul Menzel <pmen...@molgen.mpg.de>
> ---
>  drivers/char/ipmi/ipmi_si_intf.c | 12 ++++++++++++
>  1 file changed, 12 insertions(+)
> 
> diff --git a/drivers/char/ipmi/ipmi_si_intf.c 
> b/drivers/char/ipmi/ipmi_si_intf.c
> index c04aa11f0e21..6d18f8090cea 100644
> --- a/drivers/char/ipmi/ipmi_si_intf.c
> +++ b/drivers/char/ipmi/ipmi_si_intf.c
> @@ -2447,6 +2447,15 @@ static int ipmi_pci_probe_regspacing(struct smi_info 
> *info)
>       return DEFAULT_REGSPACING;
>  }
>  
> +static struct pci_device_id ipmi_pci_blacklist[] = {
> +        /*
> +         * This is a "Virtual IPMI device", whatever that is.  It appears
> +         * as a KCS device by the class, but it is not one.
> +         */
> +        { PCI_VDEVICE(REALTEK, 0x816c) },
> +        { 0, }
> +};
> +
>  static int ipmi_pci_probe(struct pci_dev *pdev,
>                                   const struct pci_device_id *ent)
>  {
> @@ -2454,6 +2463,9 @@ static int ipmi_pci_probe(struct pci_dev *pdev,
>       int class_type = pdev->class & PCI_ERMC_CLASSCODE_TYPE_MASK;
>       struct smi_info *info;
>  
> +        if (pci_match_id(ipmi_pci_blacklist, pdev))
> +                return -ENODEV;
> +

Your patch does not have tabs where it should have tabs :(

Can you fix this up and resend?

thanks,

greg k-h

Reply via email to