On Fri, 25 Jan 2019, Yinbo Zhu wrote: > From: Ramneek Mehresh <[email protected]> > > USB erratum-A006918 workaround tries to start internal PHY inside > uboot (when PLL fails to lock). However, if the workaround also > fails, then USB initialization is also stopped inside Linux. > Erratum-A006918 workaround failure creates "fsl,erratum_a006918" > node in device-tree. Presence of this node in device-tree is > used to stop USB controller initialization in Linux > > Signed-off-by: Ramneek Mehresh <[email protected]> > Signed-off-by: Suresh Gupta <[email protected]> > Signed-off-by: Yinbo Zhu <[email protected]> > --- > drivers/usb/host/ehci-fsl.c | 5 +++++ > drivers/usb/host/fsl-mph-dr-of.c | 3 ++- > 2 files changed, 7 insertions(+), 1 deletions(-) > > diff --git a/drivers/usb/host/ehci-fsl.c b/drivers/usb/host/ehci-fsl.c > index 373a816..8b47277 100644 > --- a/drivers/usb/host/ehci-fsl.c > +++ b/drivers/usb/host/ehci-fsl.c > @@ -236,6 +236,11 @@ static int ehci_fsl_setup_phy(struct usb_hcd *hcd, > portsc |= PORT_PTS_PTW; > /* fall through */ > case FSL_USB2_PHY_UTMI: > + if (pdata->has_fsl_erratum_a006918) { > + pr_warn("fsl-ehci: USB PHY clock invalid\n");
Again, you should use dev_warn() instead of pr_warn(). Alan Stern > + return -EINVAL; > + } > + > case FSL_USB2_PHY_UTMI_DUAL: > /* PHY_CLK_VALID bit is de-featured from all controller > * versions below 2.4 and is to be checked only for > diff --git a/drivers/usb/host/fsl-mph-dr-of.c > b/drivers/usb/host/fsl-mph-dr-of.c > index 4f8b8a0..762b976 100644 > --- a/drivers/usb/host/fsl-mph-dr-of.c > +++ b/drivers/usb/host/fsl-mph-dr-of.c > @@ -224,13 +224,14 @@ static int fsl_usb2_mph_dr_of_probe(struct > platform_device *ofdev) > of_property_read_bool(np, "fsl,usb-erratum-a005275"); > pdata->has_fsl_erratum_a005697 = > of_property_read_bool(np, "fsl,usb_erratum-a005697"); > + pdata->has_fsl_erratum_a006918 = > + of_property_read_bool(np, "fsl,usb_erratum-a006918"); > > if (of_get_property(np, "fsl,usb_erratum_14", NULL)) > pdata->has_fsl_erratum_14 = 1; > else > pdata->has_fsl_erratum_14 = 0; > > - > /* > * Determine whether phy_clk_valid needs to be checked > * by reading property in device tree >
