From: Martin Blumenstingl <martin.blumensti...@googlemail.com> [ Upstream commit a5ac1ead32c9aac285f6436e09b4f6111996e9b8 ]
The cpu_div3 clock (cpu_in divided by 3) generates a signal with a duty cycle of 33%. The CPU clock however requires a clock signal with a duty cycle of 50% to run stable. cpu_div3 was observed to be problematic when cycling through all available CPU frequencies (with additional patches on top of this one) while running "stress --cpu 4" in the background. This caused sporadic hangs where the whole system would fully lock up. Amlogic's 3.10 kernel code also does not use the cpu_div3 clock either when changing the CPU clock. Signed-off-by: Martin Blumenstingl <martin.blumensti...@googlemail.com> Reviewed-by: Jerome Brunet <jbru...@baylibre.com> Signed-off-by: Neil Armstrong <narmstr...@baylibre.com> Link: https://lkml.kernel.org/r/20181115224048.13511-3-martin.blumensti...@googlemail.com Signed-off-by: Sasha Levin <sas...@kernel.org> --- drivers/clk/meson/meson8b.c | 11 +++++++++-- 1 file changed, 9 insertions(+), 2 deletions(-) diff --git a/drivers/clk/meson/meson8b.c b/drivers/clk/meson/meson8b.c index 1d39273d7a04..328fcf50d9e8 100644 --- a/drivers/clk/meson/meson8b.c +++ b/drivers/clk/meson/meson8b.c @@ -612,20 +612,27 @@ static struct clk_regmap meson8b_cpu_scale_div = { }, }; +static u32 mux_table_cpu_scale_out_sel[] = { 0, 1, 3 }; static struct clk_regmap meson8b_cpu_scale_out_sel = { .data = &(struct clk_regmap_mux_data){ .offset = HHI_SYS_CPU_CLK_CNTL0, .mask = 0x3, .shift = 2, + .table = mux_table_cpu_scale_out_sel, }, .hw.init = &(struct clk_init_data){ .name = "cpu_scale_out_sel", .ops = &clk_regmap_mux_ro_ops, + /* + * NOTE: We are skipping the parent with value 0x2 (which is + * "cpu_div3") because it results in a duty cycle of 33% which + * makes the system unstable and can result in a lockup of the + * whole system. + */ .parent_names = (const char *[]) { "cpu_in_sel", "cpu_div2", - "cpu_div3", "cpu_scale_div" }, - .num_parents = 4, + .num_parents = 3, .flags = CLK_SET_RATE_PARENT, }, }; -- 2.19.1
