Fix apb, cbus, hiu and periph regions which are not aligned
with the documentation and the information provided by Amlogic
Fixes: 9c8c52f7cb4f ("arm64: dts: meson-g12a: add initial g12a s905d2 SoC DT
support")
Cc: Jianxin Pan <[email protected]>
Signed-off-by: Jerome Brunet <[email protected]>
---
arch/arm64/boot/dts/amlogic/meson-g12a.dtsi | 46 +++++++++++----------
1 file changed, 24 insertions(+), 22 deletions(-)
diff --git a/arch/arm64/boot/dts/amlogic/meson-g12a.dtsi
b/arch/arm64/boot/dts/amlogic/meson-g12a.dtsi
index 3b82a975c663..349c4e2df1b0 100644
--- a/arch/arm64/boot/dts/amlogic/meson-g12a.dtsi
+++ b/arch/arm64/boot/dts/amlogic/meson-g12a.dtsi
@@ -78,20 +78,28 @@
#size-cells = <2>;
ranges;
- periphs: periphs@ff634000 {
+ apb: bus@ff600000 {
compatible = "simple-bus";
- reg = <0x0 0xff634000 0x0 0x2000>;
+ reg = <0x0 0xff600000 0x0 0x200000>;
#address-cells = <2>;
#size-cells = <2>;
- ranges = <0x0 0x0 0x0 0xff634000 0x0 0x2000>;
- };
+ ranges = <0x0 0x0 0x0 0xff600000 0x0 0x200000>;
+
+ periphs: bus@34400 {
+ compatible = "simple-bus";
+ reg = <0x0 0x34400 0x0 0x400>;
+ #address-cells = <2>;
+ #size-cells = <2>;
+ ranges = <0x0 0x0 0x0 0x34400 0x0 0x400>;
+ };
- hiubus: bus@ff63c000 {
- compatible = "simple-bus";
- reg = <0x0 0xff63c000 0x0 0x1c00>;
- #address-cells = <2>;
- #size-cells = <2>;
- ranges = <0x0 0x0 0x0 0xff63c000 0x0 0x1c00>;
+ hiu: bus@3c000 {
+ compatible = "simple-bus";
+ reg = <0x0 0x3c000 0x0 0x1400>;
+ #address-cells = <2>;
+ #size-cells = <2>;
+ ranges = <0x0 0x0 0x0 0x3c000 0x0 0x1400>;
+ };
};
aobus: bus@ff800000 {
@@ -102,7 +110,8 @@
ranges = <0x0 0x0 0x0 0xff800000 0x0 0x100000>;
uart_AO: serial@3000 {
- compatible = "amlogic,meson-gx-uart",
"amlogic,meson-ao-uart";
+ compatible = "amlogic,meson-gx-uart",
+ "amlogic,meson-ao-uart";
reg = <0x0 0x3000 0x0 0x18>;
interrupts = <GIC_SPI 193 IRQ_TYPE_EDGE_RISING>;
clocks = <&xtal>, <&xtal>, <&xtal>;
@@ -111,7 +120,8 @@
};
uart_AO_B: serial@4000 {
- compatible = "amlogic,meson-gx-uart",
"amlogic,meson-ao-uart";
+ compatible = "amlogic,meson-gx-uart",
+ "amlogic,meson-ao-uart";
reg = <0x0 0x4000 0x0 0x18>;
interrupts = <GIC_SPI 197 IRQ_TYPE_EDGE_RISING>;
clocks = <&xtal>, <&xtal>, <&xtal>;
@@ -135,18 +145,10 @@
cbus: bus@ffd00000 {
compatible = "simple-bus";
- reg = <0x0 0xffd00000 0x0 0x25000>;
- #address-cells = <2>;
- #size-cells = <2>;
- ranges = <0x0 0x0 0x0 0xffd00000 0x0 0x25000>;
- };
-
- apb: apb@ffe00000 {
- compatible = "simple-bus";
- reg = <0x0 0xffe00000 0x0 0x200000>;
+ reg = <0x0 0xffd00000 0x0 0x100000>;
#address-cells = <2>;
#size-cells = <2>;
- ranges = <0x0 0x0 0x0 0xffe00000 0x0 0x200000>;
+ ranges = <0x0 0x0 0x0 0xffd00000 0x0 0x100000>;
};
};
--
2.20.1
