3.16.63-rc1 review patch. If anyone has any objections, please let me know.
------------------
From: Ahmad Fatoum <a.fat...@pengutronix.de>
commit 000412276370a9bcfec73b3752ceefd9a927f1db upstream.
fsl_qspi_get_seqid() may return -EINVAL, but fsl_qspi_init_ahb_read()
doesn't check for error codes with the result that -EINVAL could find
itself signalled over the bus.
In conjunction with the LS1046A SoC's A-009283 errata
("Illegal accesses to SPI flash memory can result in a system hang")
this illegal access to SPI flash memory results in a system hang
if userspace attempts reading later on.
Avoid this by always checking fsl_qspi_get_seqid()'s return value
and bail out otherwise.
Fixes: e46ecda764dc ("mtd: spi-nor: Add Freescale QuadSPI driver")
Signed-off-by: Ahmad Fatoum <a.fat...@pengutronix.de>
Signed-off-by: Boris Brezillon <boris.brezil...@bootlin.com>
[bwh: Backported to 3.16: adjust context]
Signed-off-by: Ben Hutchings <b...@decadent.org.uk>
---
drivers/mtd/spi-nor/fsl-quadspi.c | 14 ++++++++++----
1 file changed, 10 insertions(+), 4 deletions(-)
--- a/drivers/mtd/spi-nor/fsl-quadspi.c
+++ b/drivers/mtd/spi-nor/fsl-quadspi.c
@@ -451,6 +451,9 @@ fsl_qspi_runcmd(struct fsl_qspi *q, u8 c
/* trigger the LUT now */
seqid = fsl_qspi_get_seqid(q, cmd);
+ if (seqid < 0)
+ return seqid;
+
writel((seqid << QUADSPI_IPCR_SEQID_SHIFT) | len, base + QUADSPI_IPCR);
/* Wait for the interrupt. */
@@ -574,7 +577,7 @@ static void fsl_qspi_set_map_addr(struct
* causes the controller to clear the buffer, and use the sequence pointed
* by the QUADSPI_BFGENCR[SEQID] to initiate a read from the flash.
*/
-static void fsl_qspi_init_ahb_read(struct fsl_qspi *q)
+static int fsl_qspi_init_ahb_read(struct fsl_qspi *q)
{
void __iomem *base = q->iobase;
int seqid;
@@ -592,8 +595,13 @@ static void fsl_qspi_init_ahb_read(struc
/* Set the default lut sequence for AHB Read. */
seqid = fsl_qspi_get_seqid(q, q->nor[0].read_opcode);
+ if (seqid < 0)
+ return seqid;
+
writel(seqid << QUADSPI_BFGENCR_SEQID_SHIFT,
q->iobase + QUADSPI_BFGENCR);
+
+ return 0;
}
/* We use this function to do some basic init for spi_nor_scan(). */
@@ -647,9 +655,7 @@ static int fsl_qspi_nor_setup_last(struc
fsl_qspi_init_lut(q);
/* Init for AHB read */
- fsl_qspi_init_ahb_read(q);
-
- return 0;
+ return fsl_qspi_init_ahb_read(q);
}
static struct of_device_id fsl_qspi_dt_ids[] = {
