3.16.63-rc1 review patch. If anyone has any objections, please let me know.
------------------
From: "Spencer E. Olson" <olso...@umich.edu>
commit 1cbca5852d6c16e85a21487a15d211195aacd4a1 upstream.
Fixes two problems introduced as early as
commit 03aef4b6dc12 ("Staging: comedi: add ni_mio_common code"):
(1) Ensures that the last four bits of NISTC_RTSI_TRIGB_OUT_REG register is
not unduly overwritten on e-series devices. On e-series devices, the
first three of the last four bits are reserved. The last bit defines
the output selection of the RGOUT0 pin, otherwise known as
RTSI_Sub_Selection. For m-series devices, these last four bits are
indeed used as the output selection of the RTSI7 pin (and the
RTSI_Sub_Selection bit for the RGOUT0 pin is moved to the
RTSI_Trig_Direction register.
(2) Allows all 4 RTSI_BRD lines to be treated as valid sources for RTSI
lines.
This patch also cleans up the ni_get_rtsi_routing command for readability.
Fixes: 03aef4b6dc12 ("Staging: comedi: add ni_mio_common code")
Signed-off-by: Spencer E. Olson <olso...@umich.edu>
Reviewed-by: Ian Abbott <abbo...@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gre...@linuxfoundation.org>
[bwh: Backported to 3.16:
- Use NI_RTSI_OUTPUT_RTSI_BRD_0 + n instead of NI_RTSI_OUTPUT_RTSI_BRD(n)
- Use num_configurable_rtsi_channels() instead of NISTC_RTSI_TRIG_NUM_CHAN()
- Use old_RTSI_clock_channel instead of NISTC_RTSI_TRIG_OLD_CLK_CHAN
- Adjust context]
Signed-off-by: Ben Hutchings <b...@decadent.org.uk>
---
.../staging/comedi/drivers/ni_mio_common.c | 24 +++++++++++++------
1 file changed, 17 insertions(+), 7 deletions(-)
--- a/drivers/staging/comedi/drivers/ni_mio_common.c
+++ b/drivers/staging/comedi/drivers/ni_mio_common.c
@@ -5486,6 +5486,9 @@ static int ni_valid_rtsi_output_source(s
case NI_RTSI_OUTPUT_G_GATE0:
case NI_RTSI_OUTPUT_RGOUT0:
case NI_RTSI_OUTPUT_RTSI_BRD_0:
+ case NI_RTSI_OUTPUT_RTSI_BRD_0 + 1:
+ case NI_RTSI_OUTPUT_RTSI_BRD_0 + 2:
+ case NI_RTSI_OUTPUT_RTSI_BRD_0 + 3:
return 1;
break;
case NI_RTSI_OUTPUT_RTSI_OSC:
@@ -5513,12 +5516,19 @@ static int ni_set_rtsi_routing(struct co
RTSI_Trig_Output_Bits(chan, source);
devpriv->stc_writew(dev, devpriv->rtsi_trig_a_output_reg,
RTSI_Trig_A_Output_Register);
- } else if (chan < 8) {
+ } else if (chan < num_configurable_rtsi_channels(dev)) {
devpriv->rtsi_trig_b_output_reg &= ~RTSI_Trig_Output_Mask(chan);
devpriv->rtsi_trig_b_output_reg |=
RTSI_Trig_Output_Bits(chan, source);
devpriv->stc_writew(dev, devpriv->rtsi_trig_b_output_reg,
RTSI_Trig_B_Output_Register);
+ } else if (chan != old_RTSI_clock_channel) {
+ /* probably should never reach this, since the
+ * ni_valid_rtsi_output_source above errors out if chan is too
+ * high
+ */
+ dev_err(dev->class_dev, "%s: unknown rtsi channel\n", __func__);
+ return -EINVAL;
}
return 2;
}
@@ -5533,12 +5543,12 @@ static unsigned ni_get_rtsi_routing(stru
} else if (chan < num_configurable_rtsi_channels(dev)) {
return RTSI_Trig_Output_Source(chan,
devpriv->rtsi_trig_b_output_reg);
- } else {
- if (chan == old_RTSI_clock_channel)
- return NI_RTSI_OUTPUT_RTSI_OSC;
- printk("%s: bug! should never get here?\n", __func__);
- return 0;
+ } else if (chan == old_RTSI_clock_channel) {
+ return NI_RTSI_OUTPUT_RTSI_OSC;
}
+
+ dev_err(dev->class_dev, "%s: unknown rtsi channel\n", __func__);
+ return -EINVAL;
}
static int ni_rtsi_insn_config(struct comedi_device *dev,
