Hi Kishon, Miquel Raynal <miquel.ray...@bootlin.com> wrote on Tue, 8 Jan 2019 17:31:17 +0100:
> Hello, > > This series adds a new driver to support Armada 3700 COMPHY IP. > The series has been tested on an ESPRESSObin with SATA, PCIe > and USB3 host. For this purpose, patch 1 enumerates the SATA PHY > mode. The SGMII PHY mode that is supported by the IP has been written > (uses SMC calls anyway) but could not be tested on this platform. > > Three series will follow to add PHY support (or at least a PHY nodes > in the A3700/ESPRESSObin device trees) to the MVEBU AHCI driver, the > Aardvark PCI controller driver and the MVEBU xHCI driver. All this is > needed in order to achieve suspend to RAM on this platform. > > Thanks, > Miquèl > Any inputs on this series? It is important for me because it impacts SATA, PCIe and USB changes I plan to get merge. Thanks, Miquèl > > Changes since v4: > ================= > * Fixed error in the driver probe where PHY_INTERFACE_MODE_NA was > assigned to lane->mode instead of lane->submode. > * Compile-in the driver by default (depends on ARCH_MVEBU). > * Add dependency on HAVE_ARM_SMCC in Kconfig. > > Changes since v3: > ================= > * Added Rob's Reviewed-by tag on bindings. > * Rebased on top of phy -next as of the 12th of December, 2018. > * Adapted the driver to support SGMII/1000BASEX and > HS_SGMII/2500BASEX. > > Changes since v2: > ================= > * Remove redundant check on lane->port/args->arg[0] at the end of the > ->xlate() callback. Do it on both armada-cp110 and armada-a3700 > COMPHY drivers. > * Put my SoB as author of the patch first when a patch is co-developed. > > Changes since v1: > ================= > * Fix wrong check in ->xlate(). > * Apply the same fix to the cp110 comphy driver from which the a3700 > driver is based. > * Added credit to Gregorz Jaszczyk for his work. > * Added Suggested-by tag to the patch adding the COMPHY DT node. > > > Grzegorz Jaszczyk (1): > phy: enumerate SATA PHY mode > > Miquel Raynal (6): > phy: mvebu-cp110-comphy: fix port check in ->xlate() > phy: add A3700 COMPHY support > dt-bindings: phy: mvebu-comphy: extend the file to describe a3700 > bindings > MAINTAINERS: phy: add entry for Armada 3700 COMPHY driver > ARM64: dts: marvell: armada-37xx: fix SATA node scope > ARM64: dts: marvell: armada-37xx: declare the COMPHY node > > .../bindings/phy/phy-mvebu-comphy.txt | 65 +++- > MAINTAINERS | 6 + > arch/arm64/boot/dts/marvell/armada-37xx.dtsi | 31 +- > drivers/phy/marvell/Kconfig | 12 + > drivers/phy/marvell/Makefile | 1 + > drivers/phy/marvell/phy-mvebu-a3700-comphy.c | 318 ++++++++++++++++++ > drivers/phy/marvell/phy-mvebu-cp110-comphy.c | 2 - > include/linux/phy/phy.h | 1 + > 8 files changed, 421 insertions(+), 15 deletions(-) > create mode 100644 drivers/phy/marvell/phy-mvebu-a3700-comphy.c >
