06.02.2019 16:30, Sowjanya Komatineni пишет: > > >>> >>>>>> BTW, I'm seeing "atmel_mxt_ts 0-004c: Warning: Info CRC error - >>>>>> device=0xF436DC file=0x000000" whithout making any modifications to the >>>>>> original patch as well and it shall not happen, hence there is bug >>>>>> somewhere. Probably FIFO triggers are still not set up correctly... ? >>>>>> >>>>>> >>>>> In snippet you sent, I see you are forcing dma_burst to 1 always which is >>>>> what set for fifo trigger levels as well and also you are forcing dma all >>>>> the time. >>>>> So always it will be 1 word dma burst and 1 word trigger level and that >>>>> should not be an issue. >>>>> >>>> >>>> I reverted that snippet, this log is collected with the yours original >>>> patch. >>>> >>> From atmel driver, looks like this warning is from maxt_update_cfg >>> and due to CRC mismatch and above values shows read data CRC is 0Xf436dc >>> which is compared against info_crc of all 0's Info_crc is based on raw >>> config file and somehow its all 0's. this is not based on data read thru >>> i2c. >>> data->info_crc computed on data read is 0Xf436dc >>> >>> This warning is not related to I2C transfer >>> >> >> It doesn't happen with the I2C PIO mode. Seems it means that the I2C reads >> out the 0xF436DC value instead of 0x000000.. if I'm not missing anything. >> > Log that you shared this warning, doesn’t show any i2c failures with atmel > and CRC based on i2c read data is 0Xf436dc. > During this log, there are not DMA timeouts associated during this warning > timeframe. So i2c read data is thru DMA which is non-zero. > > Do you see DMA timeouts associated with this warning? I meant any DMA or I2C > timeout during that time frame of warning? >
Actually you're right, my bad. That atmel error and atmel I2C timeout (due to I2C_ERR_NO_ACK) happens in the PIO mode too, hence that part is fine. PIO log: [ 1.028889] atmel_mxt_ts 0-004c: Warning: Info CRC error - device=0xF436DC file=0x000000 [ 1.078907] atmel_mxt_ts 0-004c: Resetting device [ 1.128646] usb 1-1: new full-speed USB device number 2 using tegra-ehci [ 1.198708] atmel_mxt_ts 0-004c: __mxt_read_reg: i2c transfer failed (-121) [ 1.198732] atmel_mxt_ts 0-004c: Failed to read 28 messages (-121)
