On Thu, 07 Feb 2019, Matti Vaittinen wrote:
> ROHM BD70528MWV is an ultra-low quiescent current general
> purpose single-chip power management IC for battery-powered
> portable devices.
>
> Add MFD core which enables chip access for following subdevices:
> - regulators/LED drivers
> - battery-charger
> - gpios
> - 32.768kHz clk
> - RTC
> - watchdog
>
> Signed-off-by: Matti Vaittinen <matti.vaitti...@fi.rohmeurope.com>
> ---
> drivers/mfd/Kconfig | 17 ++
> drivers/mfd/Makefile | 1 +
> drivers/mfd/rohm-bd70528.c | 410
> +++++++++++++++++++++++++++++++++++++++
> include/linux/mfd/rohm-bd70528.h | 392 +++++++++++++++++++++++++++++++++++++
> 4 files changed, 820 insertions(+)
> create mode 100644 drivers/mfd/rohm-bd70528.c
> create mode 100644 include/linux/mfd/rohm-bd70528.h
>
> diff --git a/drivers/mfd/Kconfig b/drivers/mfd/Kconfig
> index f461460a2aeb..f1a0574cebb1 100644
> --- a/drivers/mfd/Kconfig
> +++ b/drivers/mfd/Kconfig
> @@ -1847,6 +1847,23 @@ config MFD_ROHM_BD718XX
> NXP i.MX8. It contains 8 BUCK outputs and 7 LDOs, voltage monitoring
> and emergency shut down as well as 32,768KHz clock output.
>
> +config MFD_ROHM_BD70528
> + tristate "ROHM BD70528 Power Management IC"
> + depends on I2C=y
> + depends on OF
> + select REGMAP_I2C
> + select REGMAP_IRQ
> + select MFD_CORE
> + help
> + Select this option to get support for the ROHM BD70528 Power
> + Management IC. BD71837 is general purpose single-chip power
> + management IC for battery-powered portable devices. It contains
> + 3 ultra-low current consumption buck converters, 3 LDOs and 2 LED
> + Drivers. Also included are 4 GPIOs, a real-time clock (RTC), a 32kHz
> + crystal oscillator, high-accuracy VREF for use with an external ADC,
> + 10 bits SAR ADC for battery temperature monitor and 1S battery
> + charger.
> +
> config MFD_STM32_LPTIMER
> tristate "Support for STM32 Low-Power Timer"
> depends on (ARCH_STM32 && OF) || COMPILE_TEST
> diff --git a/drivers/mfd/Makefile b/drivers/mfd/Makefile
> index 12980a4ad460..fc9b1408e39b 100644
> --- a/drivers/mfd/Makefile
> +++ b/drivers/mfd/Makefile
> @@ -241,4 +241,5 @@ obj-$(CONFIG_MFD_MXS_LRADC) += mxs-lradc.o
> obj-$(CONFIG_MFD_SC27XX_PMIC) += sprd-sc27xx-spi.o
> obj-$(CONFIG_RAVE_SP_CORE) += rave-sp.o
> obj-$(CONFIG_MFD_ROHM_BD718XX) += rohm-bd718x7.o
> +obj-$(CONFIG_MFD_ROHM_BD70528) += rohm-bd70528.o
>
> diff --git a/drivers/mfd/rohm-bd70528.c b/drivers/mfd/rohm-bd70528.c
> new file mode 100644
> index 000000000000..580164addeeb
> --- /dev/null
> +++ b/drivers/mfd/rohm-bd70528.c
> @@ -0,0 +1,410 @@
> +// SPDX-License-Identifier: GPL-2.0-or-later
> +//
> +// Copyright (C) 2018 ROHM Semiconductors
This needs updating.
> +// ROHM BD70528 PMIC driver
> +
> +#include <linux/i2c.h>
> +#include <linux/interrupt.h>
> +#include <linux/irq.h>
> +#include <linux/mfd/core.h>
> +#include <linux/mfd/rohm-bd70528.h>
> +#include <linux/module.h>
> +#include <linux/of_device.h>
> +#include <linux/regmap.h>
> +#include <linux/types.h>
> +
> +#define BD70528_INT_RES(_reg, _name) \
> + { \
> + .start = (_reg), \
> + .end = (_reg), \
> + .name = (_name), \
> + .flags = IORESOURCE_IRQ, \
> + }
I think you're looking for DEFINE_RES_IRQ_NAMED()
> +static const struct resource rtc_irqs[] = {
> + BD70528_INT_RES(BD70528_INT_RTC_ALARM, "bd70528-rtc-alm"),
> + BD70528_INT_RES(BD70528_INT_ELPS_TIM, "bd70528-elapsed-timer"),
> +};
> +
> +static const struct resource charger_irqs[] = {
> + BD70528_INT_RES(BD70528_INT_BAT_OV_RES, "bd70528-bat-ov-res"),
> + BD70528_INT_RES(BD70528_INT_BAT_OV_DET, "bd70528-bat-ov-det"),
> + BD70528_INT_RES(BD70528_INT_DBAT_DET, "bd70528-bat-dead"),
> + BD70528_INT_RES(BD70528_INT_BATTSD_COLD_RES, "bd70528-bat-warmed"),
> + BD70528_INT_RES(BD70528_INT_BATTSD_COLD_DET, "bd70528-bat-cold"),
> + BD70528_INT_RES(BD70528_INT_BATTSD_HOT_RES, "bd70528-bat-cooled"),
> + BD70528_INT_RES(BD70528_INT_BATTSD_HOT_DET, "bd70528-bat-hot"),
> + BD70528_INT_RES(BD70528_INT_CHG_TSD, "bd70528-chg-tshd"),
> + BD70528_INT_RES(BD70528_INT_BAT_RMV, "bd70528-bat-removed"),
> + BD70528_INT_RES(BD70528_INT_BAT_DET, "bd70528-bat-detected"),
> + BD70528_INT_RES(BD70528_INT_DCIN2_OV_RES, "bd70528-dcin2-ov-res"),
> + BD70528_INT_RES(BD70528_INT_DCIN2_OV_DET, "bd70528-dcin2-ov-det"),
> + BD70528_INT_RES(BD70528_INT_DCIN2_RMV, "bd70528-dcin2-removed"),
> + BD70528_INT_RES(BD70528_INT_DCIN2_DET, "bd70528-dcin2-detected"),
> + BD70528_INT_RES(BD70528_INT_DCIN1_RMV, "bd70528-dcin1-removed"),
> + BD70528_INT_RES(BD70528_INT_DCIN1_DET, "bd70528-dcin1-detected"),
> +};
> +
> +static struct mfd_cell bd70528_mfd_cells[] = {
> + { .name = "bd70528-pmic", },
> + { .name = "bd70528-gpio", },
> + /*
> + * We use BD71837 driver to drive the clk block. Only differences to
> + * BD70528 clock gate are the register address and mask.
> + */
> + { .name = "bd718xx-clk", },
> + { .name = "bd70528-wdt", },
> + {
> + .name = "bd70528-power",
> + .resources = &charger_irqs[0],
Why not just, 'charger_irqs'?
> + .num_resources = ARRAY_SIZE(charger_irqs),
> + },
> + {
These should be on the same line.
> + .name = "bd70528-rtc",
> + .resources = &rtc_irqs[0],
As above.
> + .num_resources = ARRAY_SIZE(rtc_irqs),
> + },
> +};
> +
> +static const struct regmap_range volatile_ranges[] = {
> + /* IRQ regs */
> + {
> + .range_min = BD70528_REG_INT_MAIN,
> + .range_max = BD70528_REG_INT_OP_FAIL,
> + },
> + /* RTC regs */
> + {
> + .range_min = BD70528_REG_RTC_COUNT_H,
> + .range_max = BD70528_REG_RTC_ALM_REPEAT,
> + },
> + /*
> + * WDT control reg is special. Magic values must be
> + * written to it in order to change the control. Should
> + * not be cached.
> + */
> + {
> + .range_min = BD70528_REG_WDT_CTRL,
> + .range_max = BD70528_REG_WDT_CTRL,
> + },
> + /*
> + * bd70528 contains also few other registers which require
"BD70528"
I don't think this means what you think it does.
I think you want to say "also contains a few".
> + * magic sequence to be written in order to update the value.
"sequences"
> + * At least SHIPMODE, HWRESET, WARMRESET,and STANDBY
> + */
> + {
> + .range_min = BD70528_REG_SHIPMODE,
> + .range_max = BD70528_REG_STANDBY,
> + },
> +};
> +
> +static const struct regmap_access_table volatile_regs = {
> + .yes_ranges = &volatile_ranges[0],
> + .n_yes_ranges = ARRAY_SIZE(volatile_ranges),
> +};
> +
> +static struct regmap_config bd70528_regmap = {
> + .reg_bits = 8,
> + .val_bits = 8,
> + .volatile_table = &volatile_regs,
> + .max_register = BD70528_MAX_REGISTER,
> + .cache_type = REGCACHE_RBTREE,
> +};
'\n' here.
> +/* bit [0] - Shutdown register */
> +unsigned int bit0_offsets[] = {0};
> +/* bit [1] - Power failure register */
> +unsigned int bit1_offsets[] = {1};
> +/* bit [2] - VR FAULT register */
> +unsigned int bit2_offsets[] = {2};
> +/* bit [3] - PMU register interrupts */
> +unsigned int bit3_offsets[] = {3};
> +/* bit [4] - Charger 1 and Charger 2 registers */
> +unsigned int bit4_offsets[] = {4, 5};
> +/* bit [5] - RTC register */
> +unsigned int bit5_offsets[] = {6};
> +/* bit [6] - GPIO register */
> +unsigned int bit6_offsets[] = {7};
> +/* bit [7] - Invalid operation register */
> +unsigned int bit7_offsets[] = {8};
What on earth is this?
> +static struct regmap_irq_sub_irq_map bd70528_sub_irq_offsets[] = {
> + REGMAP_IRQ_MAIN_REG_OFFSET(bit0_offsets),
> + REGMAP_IRQ_MAIN_REG_OFFSET(bit1_offsets),
> + REGMAP_IRQ_MAIN_REG_OFFSET(bit2_offsets),
> + REGMAP_IRQ_MAIN_REG_OFFSET(bit3_offsets),
> + REGMAP_IRQ_MAIN_REG_OFFSET(bit4_offsets),
> + REGMAP_IRQ_MAIN_REG_OFFSET(bit5_offsets),
> + REGMAP_IRQ_MAIN_REG_OFFSET(bit6_offsets),
> + REGMAP_IRQ_MAIN_REG_OFFSET(bit7_offsets),
> +};
This looks totally hairy. What is it mean to look like?
> +static struct regmap_irq irqs[] = {
> + REGMAP_IRQ_REG(BD70528_INT_LONGPUSH, 0, BD70528_INT_LONGPUSH_MASK),
> + REGMAP_IRQ_REG(BD70528_INT_WDT, 0, BD70528_INT_WDT_MASK),
> + REGMAP_IRQ_REG(BD70528_INT_HWRESET, 0, BD70528_INT_HWRESET_MASK),
> + REGMAP_IRQ_REG(BD70528_INT_RSTB_FAULT, 0, BD70528_INT_RSTB_FAULT_MASK),
> + REGMAP_IRQ_REG(BD70528_INT_VBAT_UVLO, 0, BD70528_INT_VBAT_UVLO_MASK),
> + REGMAP_IRQ_REG(BD70528_INT_TSD, 0, BD70528_INT_TSD_MASK),
> + REGMAP_IRQ_REG(BD70528_INT_RSTIN, 0, BD70528_INT_RSTIN_MASK),
> + REGMAP_IRQ_REG(BD70528_INT_BUCK1_FAULT, 1,
> + BD70528_INT_BUCK1_FAULT_MASK),
> + REGMAP_IRQ_REG(BD70528_INT_BUCK2_FAULT, 1,
> + BD70528_INT_BUCK2_FAULT_MASK),
> + REGMAP_IRQ_REG(BD70528_INT_BUCK3_FAULT, 1,
> + BD70528_INT_BUCK3_FAULT_MASK),
> + REGMAP_IRQ_REG(BD70528_INT_LDO1_FAULT, 1, BD70528_INT_LDO1_FAULT_MASK),
> + REGMAP_IRQ_REG(BD70528_INT_LDO2_FAULT, 1, BD70528_INT_LDO2_FAULT_MASK),
> + REGMAP_IRQ_REG(BD70528_INT_LDO3_FAULT, 1, BD70528_INT_LDO3_FAULT_MASK),
> + REGMAP_IRQ_REG(BD70528_INT_LED1_FAULT, 1, BD70528_INT_LED1_FAULT_MASK),
> + REGMAP_IRQ_REG(BD70528_INT_LED2_FAULT, 1, BD70528_INT_LED2_FAULT_MASK),
> + REGMAP_IRQ_REG(BD70528_INT_BUCK1_OCP, 2, BD70528_INT_BUCK1_OCP_MASK),
> + REGMAP_IRQ_REG(BD70528_INT_BUCK2_OCP, 2, BD70528_INT_BUCK2_OCP_MASK),
> + REGMAP_IRQ_REG(BD70528_INT_BUCK3_OCP, 2, BD70528_INT_BUCK3_OCP_MASK),
> + REGMAP_IRQ_REG(BD70528_INT_LED1_OCP, 2, BD70528_INT_LED1_OCP_MASK),
> + REGMAP_IRQ_REG(BD70528_INT_LED2_OCP, 2, BD70528_INT_LED2_OCP_MASK),
> + REGMAP_IRQ_REG(BD70528_INT_BUCK1_FULLON, 2,
> + BD70528_INT_BUCK1_FULLON_MASK),
> + REGMAP_IRQ_REG(BD70528_INT_BUCK2_FULLON, 2,
> + BD70528_INT_BUCK2_FULLON_MASK),
> + REGMAP_IRQ_REG(BD70528_INT_SHORTPUSH, 3, BD70528_INT_SHORTPUSH_MASK),
> + REGMAP_IRQ_REG(BD70528_INT_AUTO_WAKEUP, 3,
> + BD70528_INT_AUTO_WAKEUP_MASK),
> + REGMAP_IRQ_REG(BD70528_INT_STATE_CHANGE, 3,
> + BD70528_INT_STATE_CHANGE_MASK),
> + REGMAP_IRQ_REG(BD70528_INT_BAT_OV_RES, 4, BD70528_INT_BAT_OV_RES_MASK),
> + REGMAP_IRQ_REG(BD70528_INT_BAT_OV_DET, 4, BD70528_INT_BAT_OV_DET_MASK),
> + REGMAP_IRQ_REG(BD70528_INT_DBAT_DET, 4, BD70528_INT_DBAT_DET_MASK),
> + REGMAP_IRQ_REG(BD70528_INT_BATTSD_COLD_RES, 4,
> + BD70528_INT_BATTSD_COLD_RES_MASK),
> + REGMAP_IRQ_REG(BD70528_INT_BATTSD_COLD_DET, 4,
> + BD70528_INT_BATTSD_COLD_DET_MASK),
> + REGMAP_IRQ_REG(BD70528_INT_BATTSD_HOT_RES, 4,
> + BD70528_INT_BATTSD_HOT_RES_MASK),
> + REGMAP_IRQ_REG(BD70528_INT_BATTSD_HOT_DET, 4,
> + BD70528_INT_BATTSD_HOT_DET_MASK),
> + REGMAP_IRQ_REG(BD70528_INT_CHG_TSD, 4, BD70528_INT_CHG_TSD_MASK),
> + REGMAP_IRQ_REG(BD70528_INT_BAT_RMV, 5, BD70528_INT_BAT_RMV_MASK),
> + REGMAP_IRQ_REG(BD70528_INT_BAT_DET, 5, BD70528_INT_BAT_DET_MASK),
> + REGMAP_IRQ_REG(BD70528_INT_DCIN2_OV_RES, 5,
> + BD70528_INT_DCIN2_OV_RES_MASK),
> + REGMAP_IRQ_REG(BD70528_INT_DCIN2_OV_DET, 5,
> + BD70528_INT_DCIN2_OV_DET_MASK),
> + REGMAP_IRQ_REG(BD70528_INT_DCIN2_RMV, 5, BD70528_INT_DCIN2_RMV_MASK),
> + REGMAP_IRQ_REG(BD70528_INT_DCIN2_DET, 5, BD70528_INT_DCIN2_DET_MASK),
> + REGMAP_IRQ_REG(BD70528_INT_DCIN1_RMV, 5, BD70528_INT_DCIN1_RMV_MASK),
> + REGMAP_IRQ_REG(BD70528_INT_DCIN1_DET, 5, BD70528_INT_DCIN1_DET_MASK),
> + REGMAP_IRQ_REG(BD70528_INT_RTC_ALARM, 6, BD70528_INT_RTC_ALARM_MASK),
> + REGMAP_IRQ_REG(BD70528_INT_ELPS_TIM, 6, BD70528_INT_ELPS_TIM_MASK),
> + REGMAP_IRQ_REG(BD70528_INT_GPIO0, 7, BD70528_INT_GPIO0_MASK),
> + REGMAP_IRQ_REG(BD70528_INT_GPIO1, 7, BD70528_INT_GPIO1_MASK),
> + REGMAP_IRQ_REG(BD70528_INT_GPIO2, 7, BD70528_INT_GPIO2_MASK),
> + REGMAP_IRQ_REG(BD70528_INT_GPIO3, 7, BD70528_INT_GPIO3_MASK),
> + REGMAP_IRQ_REG(BD70528_INT_BUCK1_DVS_OPFAIL, 8,
> + BD70528_INT_BUCK1_DVS_OPFAIL_MASK),
> + REGMAP_IRQ_REG(BD70528_INT_BUCK2_DVS_OPFAIL, 8,
> + BD70528_INT_BUCK2_DVS_OPFAIL_MASK),
> + REGMAP_IRQ_REG(BD70528_INT_BUCK3_DVS_OPFAIL, 8,
> + BD70528_INT_BUCK3_DVS_OPFAIL_MASK),
> + REGMAP_IRQ_REG(BD70528_INT_LED1_VOLT_OPFAIL, 8,
> + BD70528_INT_LED1_VOLT_OPFAIL_MASK),
> + REGMAP_IRQ_REG(BD70528_INT_LED2_VOLT_OPFAIL, 8,
> + BD70528_INT_LED2_VOLT_OPFAIL_MASK),
> +};
> +
> +static struct regmap_irq_chip bd70528_irq_chip = {
> + .name = "bd70528_irq",
> + .main_status = BD70528_REG_INT_MAIN,
> + .irqs = &irqs[0],
> + .num_irqs = ARRAY_SIZE(irqs),
> + .status_base = BD70528_REG_INT_SHDN,
> + .mask_base = BD70528_REG_INT_SHDN_MASK,
> + .ack_base = BD70528_REG_INT_SHDN,
> + .type_base = BD70528_REG_GPIO1_IN,
> + .init_ack_masked = true,
> + .num_regs = 9,
> + .num_main_regs = 1,
> + .num_type_reg = 4,
> + .sub_reg_offsets = &bd70528_sub_irq_offsets[0],
> + .num_main_status_bits = 8,
> + .irq_reg_stride = 1,
> +};
> +
> +#define WD_CTRL_MAGIC1 0x55
> +#define WD_CTRL_MAGIC2 0xAA
> +
> +static int bd70528_wdt_set(struct bd70528 *bd70528, int enable, int
> *old_state)
> +{
> + int ret, i;
> + unsigned int tmp;
> + u8 wd_ctrl_arr[3] = { WD_CTRL_MAGIC1, WD_CTRL_MAGIC2, 0 };
> + u8 *wd_ctrl = &wd_ctrl_arr[2];
> +
> + ret = regmap_read(bd70528->chip.regmap, BD70528_REG_WDT_CTRL, &tmp);
> + if (ret)
> + return ret;
> +
> + *wd_ctrl = (u8)tmp;
> +
> + if (old_state) {
> + if (*wd_ctrl & BD70528_MASK_WDT_EN)
> + *old_state |= BD70528_WDT_STATE_BIT;
> + else
> + *old_state &= ~BD70528_WDT_STATE_BIT;
> + if ((!enable) == (!(*old_state & BD70528_WDT_STATE_BIT)))
> + return 0;
> + }
> +
> + if (enable) {
> + if (*wd_ctrl & BD70528_MASK_WDT_EN)
> + return 0;
> + *wd_ctrl |= BD70528_MASK_WDT_EN;
> + } else {
> + if (*wd_ctrl & BD70528_MASK_WDT_EN)
> + *wd_ctrl &= ~BD70528_MASK_WDT_EN;
> + else
> + return 0;
> + }
> +
> + for (i = 0; i < 3; i++) {
> + ret = regmap_write(bd70528->chip.regmap, BD70528_REG_WDT_CTRL,
> + wd_ctrl_arr[i]);
> + if (ret)
> + return ret;
> + }
> +
> + ret = regmap_read(bd70528->chip.regmap, BD70528_REG_WDT_CTRL, &tmp);
> + if ((tmp & BD70528_MASK_WDT_EN) != (*wd_ctrl & BD70528_MASK_WDT_EN)) {
> + dev_err(bd70528->chip.dev,
> + "Watchdog ctrl mismatch (hw) 0x%x (set) 0x%x\n",
> + tmp, *wd_ctrl);
> + ret = -EIO;
> + }
> +
> + return ret;
> +}
Shouldn't this be one in the WDT driver?
> +static int bd70528_i2c_probe(struct i2c_client *i2c,
> + const struct i2c_device_id *id)
> +{
> + struct bd70528 *bd70528;
> + struct regmap_irq_chip_data *irq_data;
> + int ret, i;
> + struct mutex *rtc_mutex;
> +
> + if (!i2c->irq) {
> + dev_err(&i2c->dev, "No IRQ configured\n");
> + return -EINVAL;
> + }
'\n' here.
> + bd70528 = devm_kzalloc(&i2c->dev, sizeof(*bd70528), GFP_KERNEL);
> +
Remove this line.
> + if (!bd70528)
> + return -ENOMEM;
> +
> + mutex_init(&bd70528->rtc_timer_lock);
Shouldn't this in the RTC driver?
> + dev_set_drvdata(&i2c->dev, bd70528);
'\n' here.
> + bd70528->chip.chip_type = ROHM_CHIP_TYPE_BD70528;
> + bd70528->wdt_set = bd70528_wdt_set;
Why?
> + bd70528->chip.regmap = devm_regmap_init_i2c(i2c, &bd70528_regmap);
> + if (IS_ERR(bd70528->chip.regmap)) {
> + dev_err(&i2c->dev, "regmap initialization failed\n");
> + return PTR_ERR(bd70528->chip.regmap);
> + }
> +
> + /*
> + * Disallow type setting for all IRQs by default as
> + * most of them do not support setting type.
> + */
> + for (i = 0; i < ARRAY_SIZE(irqs); i++)
> + irqs[i].type.types_supported = 0;
> +
> + irqs[BD70528_INT_GPIO0].type.type_reg_offset = 0;
> + irqs[BD70528_INT_GPIO0].type.type_rising_val = 0x20;
> + irqs[BD70528_INT_GPIO0].type.type_falling_val = 0x10;
> + irqs[BD70528_INT_GPIO0].type.type_level_high_val = 0x40;
> + irqs[BD70528_INT_GPIO0].type.type_level_low_val = 0x50;
> + irqs[BD70528_INT_GPIO0].type.types_supported = (IRQ_TYPE_EDGE_BOTH |
> + IRQ_TYPE_LEVEL_HIGH | IRQ_TYPE_LEVEL_LOW);
> + irqs[BD70528_INT_GPIO1].type.type_reg_offset = 2;
> + irqs[BD70528_INT_GPIO1].type.type_rising_val = 0x20;
> + irqs[BD70528_INT_GPIO1].type.type_falling_val = 0x10;
> + irqs[BD70528_INT_GPIO1].type.type_level_high_val = 0x40;
> + irqs[BD70528_INT_GPIO1].type.type_level_low_val = 0x50;
> + irqs[BD70528_INT_GPIO1].type.types_supported = (IRQ_TYPE_EDGE_BOTH |
> + IRQ_TYPE_LEVEL_HIGH | IRQ_TYPE_LEVEL_LOW);
> + irqs[BD70528_INT_GPIO2].type.type_reg_offset = 4;
> + irqs[BD70528_INT_GPIO2].type.type_rising_val = 0x20;
> + irqs[BD70528_INT_GPIO2].type.type_falling_val = 0x10;
> + irqs[BD70528_INT_GPIO2].type.type_level_high_val = 0x40;
> + irqs[BD70528_INT_GPIO2].type.type_level_low_val = 0x50;
> + irqs[BD70528_INT_GPIO2].type.types_supported = (IRQ_TYPE_EDGE_BOTH |
> + IRQ_TYPE_LEVEL_HIGH | IRQ_TYPE_LEVEL_LOW);
> + irqs[BD70528_INT_GPIO3].type.type_reg_offset = 6;
> + irqs[BD70528_INT_GPIO3].type.type_rising_val = 0x20;
> + irqs[BD70528_INT_GPIO3].type.type_falling_val = 0x10;
> + irqs[BD70528_INT_GPIO3].type.type_level_high_val = 0x40;
> + irqs[BD70528_INT_GPIO3].type.type_level_low_val = 0x50;
> + irqs[BD70528_INT_GPIO3].type.types_supported = (IRQ_TYPE_EDGE_BOTH |
> + IRQ_TYPE_LEVEL_HIGH | IRQ_TYPE_LEVEL_LOW);
Could you please explain:
a) what you're doing here
b) why you don't mass assign them
- seeing as most of the data is identical.
> + ret = devm_regmap_add_irq_chip(&i2c->dev, bd70528->chip.regmap,
> + i2c->irq, IRQF_ONESHOT, 0,
> + &bd70528_irq_chip, &irq_data);
> + if (ret) {
> + dev_err(&i2c->dev, "Failed to add irq_chip\n");
> + return ret;
> + }
'\n' here.
> + dev_dbg(&i2c->dev, "Registered %d irqs for chip\n",
> + bd70528_irq_chip.num_irqs);
Is this really required/useful?
> + /*
> + * BD70528 irq controller is not touching the main mask register.
"IRQ"
> + * So enable the GPIO block interrupts at main level. We can just
> + * leave them enabled as irq-controller should disable irqs
"the IRQ controller"
"IRQs"
> + * from sub-registers when IRQ is disabled or freed.
> + */
> + ret = regmap_update_bits(bd70528->chip.regmap,
> + BD70528_REG_INT_MAIN_MASK,
> + BD70528_INT_GPIO_MASK, 0);
> +
> + ret = devm_mfd_add_devices(&i2c->dev, PLATFORM_DEVID_AUTO,
> + bd70528_mfd_cells,
> + ARRAY_SIZE(bd70528_mfd_cells), NULL, 0,
> + regmap_irq_get_domain(irq_data));
> + if (ret)
> + dev_err(&i2c->dev, "Failed to create subdevices\n");
> +
> + return ret;
> +}
> +
> +static const struct of_device_id bd70528_of_match[] = {
> + {
> + .compatible = "rohm,bd70528",
> + },
This can be placed on a single line.
> + { },
> +};
> +MODULE_DEVICE_TABLE(of, bd70528_of_match);
> +
> +static struct i2c_driver bd70528_drv = {
> + .driver = {
> + .name = "rohm-bd70528",
> + .of_match_table = bd70528_of_match,
> + },
> + .probe = &bd70528_i2c_probe,
> +};
> +
> +static int __init bd70528_init(void)
> +{
> + return i2c_add_driver(&bd70528_drv);
> +}
> +subsys_initcall(bd70528_init);
Does it need to be initialised this early?
> +static void __exit bd70528_exit(void)
> +{
> + i2c_del_driver(&bd70528_drv);
> +}
> +module_exit(bd70528_exit);
> +
> +MODULE_AUTHOR("Matti Vaittinen <matti.vaitti...@fi.rohmeurope.com>");
> +MODULE_DESCRIPTION("ROHM BD70528 Power Management IC driver");
> +MODULE_LICENSE("GPL");
> diff --git a/include/linux/mfd/rohm-bd70528.h
> b/include/linux/mfd/rohm-bd70528.h
> new file mode 100644
> index 000000000000..576b672870b7
> --- /dev/null
> +++ b/include/linux/mfd/rohm-bd70528.h
> @@ -0,0 +1,392 @@
> +/* SPDX-License-Identifier: GPL-2.0-or-later */
> +/* Copyright (C) 2018 ROHM Semiconductors */
> +
> +#ifndef __LINUX_MFD_BD70528_H__
> +#define __LINUX_MFD_BD70528_H__
> +
> +#include <linux/device.h>
> +#include <linux/mfd/rohm-generic.h>
> +#include <linux/regmap.h>
> +
> +struct bd70528 {
> + /*
> + * Please keep this as the first member here as some
> + * drivers (clk) supporting more than one chip may only know this
> + * generic struct 'struct rohm_regmap_dev' and assume it is
> + * the first chunk of parent device's private data.
> + */
> + struct rohm_regmap_dev chip;
> + /* wdt_set must be called rtc_timer_lock held */
This doesn't make sense.
[...]
--
Lee Jones [李琼斯]
Linaro Services Technical Lead
Linaro.org │ Open source software for ARM SoCs
Follow Linaro: Facebook | Twitter | Blog
