On Thu, Jan 24, 2019 at 09:27:31PM +0100, Paweł Chmiel wrote:
> From: Jonathan Bakker <[email protected]>
>
> pwm_vibrator_stop disables the regulator, but it can be called from
> multiple places, even when the regulator is already disabled. Fix this
> by using regulator_is_enabled check when starting and stopping device.
>
> Signed-off-by: Jonathan Bakker <[email protected]>
> Signed-off-by: Paweł Chmiel <[email protected]>
Applied, thank you.
> ---
> Changes from v1:
> - Rather than using regulator_is_enabled api, use local flag for
> checking if regulator is enabled
> ---
> drivers/input/misc/pwm-vibra.c | 17 ++++++++++++-----
> 1 file changed, 12 insertions(+), 5 deletions(-)
>
> diff --git a/drivers/input/misc/pwm-vibra.c b/drivers/input/misc/pwm-vibra.c
> index 55da191ae550..9df87431d7d4 100644
> --- a/drivers/input/misc/pwm-vibra.c
> +++ b/drivers/input/misc/pwm-vibra.c
> @@ -34,6 +34,7 @@ struct pwm_vibrator {
> struct work_struct play_work;
> u16 level;
> u32 direction_duty_cycle;
> + bool vcc_on;
> };
>
> static int pwm_vibrator_start(struct pwm_vibrator *vibrator)
> @@ -42,10 +43,13 @@ static int pwm_vibrator_start(struct pwm_vibrator
> *vibrator)
> struct pwm_state state;
> int err;
>
> - err = regulator_enable(vibrator->vcc);
> - if (err) {
> - dev_err(pdev, "failed to enable regulator: %d", err);
> - return err;
> + if (!vibrator->vcc_on) {
> + err = regulator_enable(vibrator->vcc);
> + if (err) {
> + dev_err(pdev, "failed to enable regulator: %d", err);
> + return err;
> + }
> + vibrator->vcc_on = true;
> }
>
> pwm_get_state(vibrator->pwm, &state);
> @@ -76,7 +80,10 @@ static int pwm_vibrator_start(struct pwm_vibrator
> *vibrator)
>
> static void pwm_vibrator_stop(struct pwm_vibrator *vibrator)
> {
> - regulator_disable(vibrator->vcc);
> + if (vibrator->vcc_on) {
> + regulator_disable(vibrator->vcc);
> + vibrator->vcc_on = false;
> + }
>
> if (vibrator->pwm_dir)
> pwm_disable(vibrator->pwm_dir);
> --
> 2.17.1
>
--
Dmitry
