Hi Rob,
>On Thu, Jan 31, 2019 at 11:52:28AM +0000, Pawel Laszczak wrote:
>> This patch aim at documenting USB related dt-bindings for the
>> Cadence USBSS-DRD controller.
>>
>> Signed-off-by: Pawel Laszczak <paw...@cadence.com>
>> ---
>> .../devicetree/bindings/usb/cdns-usb3.txt | 33 +++++++++++++++++++
>> 1 file changed, 33 insertions(+)
>> create mode 100644 Documentation/devicetree/bindings/usb/cdns-usb3.txt
>>
>> diff --git a/Documentation/devicetree/bindings/usb/cdns-usb3.txt
>> b/Documentation/devicetree/bindings/usb/cdns-usb3.txt
>> new file mode 100644
>> index 000000000000..6dc38be77f5c
>> --- /dev/null
>> +++ b/Documentation/devicetree/bindings/usb/cdns-usb3.txt
>> @@ -0,0 +1,33 @@
>> +Binding for the Cadence USBSS-DRD controller
>> +
>> +Required properties:
>> + - reg: Physical base address and size of the controller's register areas.
>> + Controller has 3 different regions:
>> + region 1 - HOST registers area
>> + region 2 - DEVICE registers area
>> + region 3 - OTG/DRD registers area
>> + - reg-names - register memory area names:
>> + "xhci" - for HOST registers space
>> + "dev" - for DEVICE registers space
>> + "otg" - for OTG/DRD registers space
>> + - compatible: Should contain: "cdns,usb3-1.0.0" or "cdns,usb3-1.0.1"
>> + - interrupts: Interrupt specifier. Refer to interrupt bindings.
>> + Driver supports only single interrupt line.
>
>Driver supports or h/w only has 1 interrupt?
h/w internally has 3 separate interrupt line, but in my testing board
they are ored. So physically driver sees only one h/w interrupt line and
assumes that h/w has single common interrupt line.
>
>> + This single interrupt is shared between Device,
>> + host and OTG/DRD part of driver.
>> +
>> +Optional properties:
>> + - maximum-speed : valid arguments are "super-speed", "high-speed" and
>> + "full-speed"; refer to usb/generic.txt
>> + - dr_mode: Should be one of "host", "peripheral" or "otg".
>> + - phys: reference to the USB PHY
>> +
>> +Example:
>> + usb@f3000000 {
>> + compatible = "cdns,usb3";
>
>Doesn't match above.
Right, should be:
Compatible = " cdns,usb3-1.0.0", "cdns,usb3-1.0.1";
>
>> + interrupts = <USB_IRQ 7 IRQ_TYPE_LEVEL_HIGH>;
>> + reg = <0xf3000000 0x10000 /* memory area for HOST
>> registers */
>> + 0xf3010000 0x10000 /* memory area for DEVICE
>> registers */
>> + 0xf3020000 0x10000>; /* memory area for OTG/DRD
>> registers */
>
>Are these really 64KB long? That wastes virtual address space on 32-bit
>systems if not.
Yes, on my testing platform it takes 64KB. It's only example, and it could be
limited.
>
>> + reg-names = "xhci", "dev", "otg";
>> + };
>> --
>> 2.17.1
>>
Thanks
Pawel
