Hi, I'm having problems with a new 500 GB USB disk. It works, but sometimes I get these in dmesg:
usb 1-3: reset high speed USB device using ehci_hcd and address 2 usb 5-1: USB disconnect, address 2 drivers/usb/class/usblp.c: usblp0: removed sd 0:0:0:0: Device not ready: <6>: Sense Key : 0x2 [current] : ASC=0x4 ASCQ=0x2 end_request: I/O error, dev sda, sector 254148215 sd 0:0:0:0: Device not ready: <6>: Sense Key : 0x2 [current] : ASC=0x4 ASCQ=0x2 end_request: I/O error, dev sda, sector 252434023 EXT3-fs error (device sda1): ext3_find_entry: reading directory #15761836 offset 0 There's also a printer connected. This is on a pci/usb2 card. When the above happens, I get I/O errors. When I mount the drive next, there are errors and often missing files. Quite annoying! Kernel is 2.6.21 What's going on? Thanks, Niels - To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to [EMAIL PROTECTED] More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/