On Mon, 18 Feb 2019 10:04:41 +0800
[email protected] wrote:

> From: Guo Ren <[email protected]>
> 
> Add trigger type and priority setting for csky,mpintc.
> 
> Changelog:
>  - change #interrupt-cells to <3>
> 
> Signed-off-by: Guo Ren <[email protected]>
> Cc: Marc Zyngier <[email protected]>
> Cc: Rob Herring <[email protected]>
> ---
>  .../bindings/interrupt-controller/csky,mpintc.txt   | 21 
> +++++++++++++++++----
>  1 file changed, 17 insertions(+), 4 deletions(-)
> 
> diff --git 
> a/Documentation/devicetree/bindings/interrupt-controller/csky,mpintc.txt 
> b/Documentation/devicetree/bindings/interrupt-controller/csky,mpintc.txt
> index ab921f1..dccd913 100644
> --- a/Documentation/devicetree/bindings/interrupt-controller/csky,mpintc.txt
> +++ b/Documentation/devicetree/bindings/interrupt-controller/csky,mpintc.txt
> @@ -6,11 +6,18 @@ C-SKY Multi-processors Interrupt Controller is designed for 
> ck807/ck810/ck860
>  SMP soc, and it also could be used in non-SMP system.
>  
>  Interrupt number definition:
> -
>    0-15  : software irq, and we use 15 as our IPI_IRQ.
>   16-31  : private  irq, and we use 16 as the co-processor timer.
>   31-1024: common irq for soc ip.
>  
> +Interrupt triger mode:
> + IRQ_TYPE_LEVEL_HIGH (default)
> + IRQ_TYPE_LEVEL_LOW
> + IRQ_TYPE_EDGE_RISING
> + IRQ_TYPE_EDGE_FALLING
> +
> +Interrupt priority range: 0-255
> +
>  =============================
>  intc node bindings definition
>  =============================
> @@ -26,15 +33,21 @@ intc node bindings definition
>       - #interrupt-cells
>               Usage: required
>               Value type: <u32>
> -             Definition: must be <1>
> +             Definition: <3>

This seem to be invalidating all existing DTs. Is this an acceptable
thing to do? It will require an Ack from a DT maintainer.

>       - interrupt-controller:
>               Usage: required
>  
> -Examples:
> +Examples: ("interrupts = <irq_num IRQ_TYPE_XXX priority>")
>  ---------
>  
>       intc: interrupt-controller {
>               compatible = "csky,mpintc";
> -             #interrupt-cells = <1>;
> +             #interrupt-cells = <3>;
>               interrupt-controller;
>       };
> +
> +     device: device-example {
> +             ...
> +             interrupts = <34 IRQ_TYPE_EDGE_RISING 254>;
> +             interrupt-parent = <&intc>;
> +     };

Thanks,

        M.
-- 
Without deviation from the norm, progress is not possible.

Reply via email to