Hi,
Fedora got report of a panic when I accidentally left debugging enabled
on a build https://bugzilla.redhat.com/show_bug.cgi?id=1677438
It looks like a panic from code in CONFIG_FAIL_MMC_REQUEST from the
cqhci driver because there isn't a command (high level overview)
(gdb) list *(mmc_should_fail_request+0xa)
0x149a is in mmc_should_fail_request (drivers/mmc/core/core.c:98).
93 };
94
95 if (!data)
96 return;
97
98 if (cmd->error || data->error ||
99 !should_fail(&host->fail_mmc_request, data->blksz *
data->blocks))
100 return;
101
102 data->error = data_errors[prandom_u32() %
ARRAY_SIZE(data_errors)];
(gdb)
(gdb) list *(mmc_cqe_request_done+0x1c)
0x2a6c is in mmc_cqe_request_done (drivers/mmc/core/core.c:505).
500 void mmc_cqe_request_done(struct mmc_host *host, struct mmc_request
*mrq)
501 {
502 mmc_should_fail_request(host, mrq);
503
504 /* Flag re-tuning needed on CRC errors */
505 if ((mrq->cmd && mrq->cmd->error == -EILSEQ) ||
506 (mrq->data && mrq->data->error == -EILSEQ))
507 mmc_retune_needed(host);
508
509 trace_mmc_request_done(host, mrq);
(gdb) list *(cqhci_irq+0x1d2)
0x1172 is in cqhci_irq (drivers/mmc/host/cqhci.c:747).
742 data->bytes_xfered = 0;
743 else
744 data->bytes_xfered = data->blksz * data->blocks;
745 }
746
747 mmc_cqe_request_done(mmc, mrq);
748 }
749
750 irqreturn_t cqhci_irq(struct mmc_host *mmc, u32 intmask, int cmd_error,
751 int data_error)
This can be worked around by turning off the option but it
seems like something to fix up.
Thanks,
Laura
