On Thu, Feb 07, 2019 at 04:19:41PM +0530, Amit Kucheria wrote:
> qcs404 has 10 sensors connected to the single TSENS IP. Define a thermal
> zone for each of those sensors to expose the temperature of each zone.
>
> Signed-off-by: Amit Kucheria <[email protected]>
> ---
> arch/arm64/boot/dts/qcom/qcs404.dtsi | 243 +++++++++++++++++++++++++++
> 1 file changed, 243 insertions(+)
>
> diff --git a/arch/arm64/boot/dts/qcom/qcs404.dtsi
> b/arch/arm64/boot/dts/qcom/qcs404.dtsi
> index 57d14d8f0c90..ca99c45864df 100644
> --- a/arch/arm64/boot/dts/qcom/qcs404.dtsi
> +++ b/arch/arm64/boot/dts/qcom/qcs404.dtsi
> @@ -3,6 +3,7 @@
>
> #include <dt-bindings/interrupt-controller/arm-gic.h>
> #include <dt-bindings/clock/qcom,gcc-qcs404.h>
> +#include <dt-bindings/thermal/thermal.h>
>
> / {
> interrupt-parent = <&intc>;
> @@ -30,6 +31,7 @@
> reg = <0x100>;
> enable-method = "psci";
> next-level-cache = <&L2_0>;
> + #cooling-cells= <2>;
> };
>
> CPU1: cpu@101 {
> @@ -38,6 +40,7 @@
> reg = <0x101>;
> enable-method = "psci";
> next-level-cache = <&L2_0>;
> + #cooling-cells= <2>;
> };
>
> CPU2: cpu@102 {
> @@ -46,6 +49,7 @@
> reg = <0x102>;
> enable-method = "psci";
> next-level-cache = <&L2_0>;
> + #cooling-cells= <2>;
> };
>
> CPU3: cpu@103 {
> @@ -54,6 +58,7 @@
> reg = <0x103>;
> enable-method = "psci";
> next-level-cache = <&L2_0>;
> + #cooling-cells= <2>;
> };
>
> L2_0: l2-cache {
> @@ -507,4 +512,242 @@
> #interrupt-cells = <2>;
> };
> };
> +
> + thermal-zones {
There are several zones with passive trips and no cooling maps.
> + aoss-thermal {
> + polling-delay-passive = <250>;
> + polling-delay = <1000>;
> +
> + thermal-sensors = <&tsens 0>;
> +
> + trips {
> + aoss_alert0: trip-point@0 {
> + temperature = <95000>;
> + hysteresis = <2000>;
> + type = "passive";
> + };
> + aoss_crit: aoss_crit {
> + temperature = <110000>;
> + hysteresis = <2000>;
> + type = "critical";
> + };
> + };
> + };
> +
> + dsp-thermal {
> + polling-delay-passive = <250>;
> + polling-delay = <1000>;
> +
> + thermal-sensors = <&tsens 1>;
> +
> + trips {
> + dsp_alert0: trip-point@0 {
> + temperature = <95000>;
> + hysteresis = <2000>;
> + type = "passive";
> + };
> + dsp_crit: dsp_crit {
> + temperature = <110000>;
> + hysteresis = <2000>;
> + type = "critical";
> + };
> + };
> + };
> +
> + lpass-thermal {
> + polling-delay-passive = <250>;
> + polling-delay = <1000>;
> +
> + thermal-sensors = <&tsens 2>;
> +
> + trips {
> + lpass_alert0: trip-point@0 {
> + temperature = <95000>;
> + hysteresis = <2000>;
> + type = "passive";
> + };
> + lpass_crit: lpass_crit {
> + temperature = <110000>;
> + hysteresis = <2000>;
> + type = "critical";
> + };
> + };
> + };
> +
> + wlan-thermal {
> + polling-delay-passive = <250>;
> + polling-delay = <1000>;
> +
> + thermal-sensors = <&tsens 3>;
> +
> + trips {
> + wlan_alert0: trip-point@0 {
> + temperature = <95000>;
> + hysteresis = <2000>;
> + type = "passive";
> + };
> + wlan_crit: wlan_crit {
> + temperature = <110000>;
> + hysteresis = <2000>;
> + type = "critical";
> + };
> + };
> + };
> +
> + cluster-thermal {
> + polling-delay-passive = <250>;
> + polling-delay = <1000>;
> +
> + thermal-sensors = <&tsens 4>;
> +
> + trips {
> + cluster_alert0: trip-point@0 {
> + temperature = <95000>;
> + hysteresis = <2000>;
> + type = "passive";
> + };
> + cluster_crit: cluster_crit {
> + temperature = <110000>;
> + hysteresis = <2000>;
> + type = "critical";
> + };
> + };
> + };
> +
> + cpu0-thermal {
> + polling-delay-passive = <250>;
> + polling-delay = <1000>;
> +
> + thermal-sensors = <&tsens 5>;
> +
> + trips {
> + cpu0_alert0: trip-point@0 {
> + temperature = <95000>;
> + hysteresis = <2000>;
> + type = "passive";
> + };
> + cpu0_crit: cpu_crit {
> + temperature = <110000>;
> + hysteresis = <2000>;
> + type = "critical";
> + };
> + };
> + cooling-maps {
> + map0 {
> + trip = <&cpu0_alert0>;
> + cooling-device = <&CPU0
> THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
> + <&CPU1 THERMAL_NO_LIMIT
> THERMAL_NO_LIMIT>,
> + <&CPU2 THERMAL_NO_LIMIT
> THERMAL_NO_LIMIT>,
> + <&CPU3 THERMAL_NO_LIMIT
> THERMAL_NO_LIMIT>;
> + };
> + };
> + };
> +
> + cpu1-thermal {
> + polling-delay-passive = <250>;
> + polling-delay = <1000>;
> +
> + thermal-sensors = <&tsens 6>;
> +
> + trips {
> + cpu1_alert0: trip-point@0 {
> + temperature = <95000>;
> + hysteresis = <2000>;
> + type = "passive";
> + };
> + cpu1_crit: cpu_crit {
> + temperature = <110000>;
> + hysteresis = <2000>;
> + type = "critical";
> + };
> + };
> + cooling-maps {
> + map0 {
> + trip = <&cpu1_alert0>;
> + cooling-device = <&CPU0
> THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
> + <&CPU1 THERMAL_NO_LIMIT
> THERMAL_NO_LIMIT>,
> + <&CPU2 THERMAL_NO_LIMIT
> THERMAL_NO_LIMIT>,
> + <&CPU3 THERMAL_NO_LIMIT
> THERMAL_NO_LIMIT>;
> + };
> + };
> + };
> +
> + cpu2-thermal {
> + polling-delay-passive = <250>;
> + polling-delay = <1000>;
> +
> + thermal-sensors = <&tsens 7>;
> +
> + trips {
> + cpu2_alert0: trip-point@0 {
> + temperature = <95000>;
> + hysteresis = <2000>;
> + type = "passive";
> + };
> + cpu2_crit: cpu_crit {
> + temperature = <110000>;
> + hysteresis = <2000>;
> + type = "critical";
> + };
> + };
> + cooling-maps {
> + map0 {
> + trip = <&cpu2_alert0>;
> + cooling-device = <&CPU0
> THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
> + <&CPU1 THERMAL_NO_LIMIT
> THERMAL_NO_LIMIT>,
> + <&CPU2 THERMAL_NO_LIMIT
> THERMAL_NO_LIMIT>,
> + <&CPU3 THERMAL_NO_LIMIT
> THERMAL_NO_LIMIT>;
> + };
> + };
> + };
> +
> + cpu3-thermal {
> + polling-delay-passive = <250>;
> + polling-delay = <1000>;
> +
> + thermal-sensors = <&tsens 8>;
> +
> + trips {
> + cpu3_alert0: trip-point@0 {
> + temperature = <95000>;
> + hysteresis = <2000>;
> + type = "passive";
> + };
> + cpu3_crit: cpu_crit {
> + temperature = <110000>;
> + hysteresis = <2000>;
> + type = "critical";
> + };
> + };
> + cooling-maps {
> + map0 {
> + trip = <&cpu3_alert0>;
> + cooling-device = <&CPU0
> THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
> + <&CPU1 THERMAL_NO_LIMIT
> THERMAL_NO_LIMIT>,
> + <&CPU2 THERMAL_NO_LIMIT
> THERMAL_NO_LIMIT>,
> + <&CPU3 THERMAL_NO_LIMIT
> THERMAL_NO_LIMIT>;
> + };
> + };
> + };
> +
> + gpu-thermal {
> + polling-delay-passive = <250>;
> + polling-delay = <1000>;
> +
> + thermal-sensors = <&tsens 9>;
> +
> + trips {
> + gpu_alert0: trip-point@0 {
> + temperature = <95000>;
> + hysteresis = <2000>;
> + type = "passive";
> + };
> + gpu_crit: gpu_crit {
> + temperature = <95000>;
> + hysteresis = <2000>;
> + type = "critical";
> + };
> + };
> + };
> + };
> };
> --
> 2.17.1
>
