In the present driver outbound window configuration is done to map above
32-bit address I/O regions with corresponding PCI memory range given in
ranges DT property.

This patch add outbound window configuration to map below 32-bit I/O range
with corresponding PCI memory, which helps to access I/O region in IA32
and one to one mapping of I/O region to PCI memory.

Ex:
1. ranges DT property given for current driver is,
    ranges = <0x83000000 0x0 0x40000000 0x4 0x00000000 0 0x40000000>;
    I/O region address is 0x400000000
2. ranges DT property can be given after this patch,
    ranges = <0x83000000 0x0 0x42000000 0x0 0x42000000 0 0x2000000>;
    I/O region address is 0x42000000

Signed-off-by: Srinath Mannam <srinath.man...@broadcom.com>
Signed-off-by: Abhishek Shah <abhishek.s...@broadcom.com>
Signed-off-by: Ray Jui <ray....@broadcom.com>
Reviewed-by: Scott Branden <scott.bran...@broadcom.com>
Reviewed-by: Vikram Prakash <vikram.prak...@broadcom.com>
---
 drivers/pci/controller/pcie-iproc.c | 21 +++++++++++++++++++--
 1 file changed, 19 insertions(+), 2 deletions(-)

diff --git a/drivers/pci/controller/pcie-iproc.c 
b/drivers/pci/controller/pcie-iproc.c
index b882255..080f142 100644
--- a/drivers/pci/controller/pcie-iproc.c
+++ b/drivers/pci/controller/pcie-iproc.c
@@ -955,8 +955,25 @@ static int iproc_pcie_setup_ob(struct iproc_pcie *pcie, 
u64 axi_addr,
                        resource_size_t window_size =
                                ob_map->window_sizes[size_idx] * SZ_1M;
 
-                       if (size < window_size)
-                               continue;
+                       /*
+                        * Keep iterating until we reach the last window and
+                        * with the minimal window size at index zero. In this
+                        * case, we take a compromise by mapping it using the
+                        * minimum window size that can be supported
+                        */
+                       if (size < window_size) {
+                               if (size_idx > 0 || window_idx > 0)
+                                       continue;
+
+                               /*
+                                * For the corner case of reaching the minimal
+                                * window size that can be supported on the
+                                * last window
+                                */
+                               axi_addr = ALIGN_DOWN(axi_addr, window_size);
+                               pci_addr = ALIGN_DOWN(pci_addr, window_size);
+                               size = window_size;
+                       }
 
                        if (!IS_ALIGNED(axi_addr, window_size) ||
                            !IS_ALIGNED(pci_addr, window_size)) {
-- 
2.7.4

Reply via email to