Formatting of Kconfig files doesn't look so pretty, so let the Great White Handkerchief come around and clean it up.
Signed-off-by: Enrico Weigelt, metux IT consult <[email protected]> --- drivers/hwmon/Kconfig | 40 ++++++++++++++++++++-------------------- drivers/hwmon/occ/Kconfig | 20 ++++++++++---------- 2 files changed, 30 insertions(+), 30 deletions(-) diff --git a/drivers/hwmon/Kconfig b/drivers/hwmon/Kconfig index 6f929bf..0ea07fe 100644 --- a/drivers/hwmon/Kconfig +++ b/drivers/hwmon/Kconfig @@ -484,10 +484,10 @@ config SENSORS_F75375S will be called f75375s. config SENSORS_MC13783_ADC - tristate "Freescale MC13783/MC13892 ADC" - depends on MFD_MC13XXX - help - Support for the A/D converter on MC13783 and MC13892 PMIC. + tristate "Freescale MC13783/MC13892 ADC" + depends on MFD_MC13XXX + help + Support for the A/D converter on MC13783 and MC13892 PMIC. config SENSORS_FSCHMD tristate "Fujitsu Siemens Computers sensor chips" @@ -1027,18 +1027,18 @@ config SENSORS_LM75 If you say yes here you get support for one common type of temperature sensor chip, with models including: - - Analog Devices ADT75 - - Dallas Semiconductor DS75, DS1775 and DS7505 - - Global Mixed-mode Technology (GMT) G751 - - Maxim MAX6625 and MAX6626 - - Microchip MCP980x - - National Semiconductor LM75, LM75A - - NXP's LM75A - - ST Microelectronics STDS75 - - ST Microelectronics STLM75 - - TelCom (now Microchip) TCN75 - - Texas Instruments TMP100, TMP101, TMP105, TMP112, TMP75, - TMP175, TMP275 + - Analog Devices ADT75 + - Dallas Semiconductor DS75, DS1775 and DS7505 + - Global Mixed-mode Technology (GMT) G751 + - Maxim MAX6625 and MAX6626 + - Microchip MCP980x + - National Semiconductor LM75, LM75A + - NXP's LM75A + - ST Microelectronics STDS75 + - ST Microelectronics STLM75 + - TelCom (now Microchip) TCN75 + - Texas Instruments TMP100, TMP101, TMP105, TMP112, TMP75, + TMP175, TMP275 This driver supports driver model based binding through board specific I2C device tables. @@ -1275,10 +1275,10 @@ config SENSORS_NPCM7XX imply THERMAL help This driver provides support for Nuvoton NPCM750/730/715/705 PWM - and Fan controllers. + and Fan controllers. - This driver can also be built as a module. If so, the module - will be called npcm750-pwm-fan. + This driver can also be built as a module. If so, the module + will be called npcm750-pwm-fan. config SENSORS_NSA320 tristate "ZyXEL NSA320 and compatible fan speed and temperature sensors" @@ -1591,7 +1591,7 @@ config SENSORS_ADS7871 config SENSORS_AMC6821 tristate "Texas Instruments AMC6821" - depends on I2C + depends on I2C help If you say yes here you get support for the Texas Instruments AMC6821 hardware monitoring chips. diff --git a/drivers/hwmon/occ/Kconfig b/drivers/hwmon/occ/Kconfig index 6668662..82f32c0 100644 --- a/drivers/hwmon/occ/Kconfig +++ b/drivers/hwmon/occ/Kconfig @@ -7,24 +7,24 @@ config SENSORS_OCC_P8_I2C depends on I2C select SENSORS_OCC help - This option enables support for monitoring sensors provided by the - On-Chip Controller (OCC) on a POWER8 processor. Communications with - the OCC are established through I2C bus. + This option enables support for monitoring sensors provided by the + On-Chip Controller (OCC) on a POWER8 processor. Communications with + the OCC are established through I2C bus. - This driver can also be built as a module. If so, the module will be - called occ-p8-hwmon. + This driver can also be built as a module. If so, the module will be + called occ-p8-hwmon. config SENSORS_OCC_P9_SBE tristate "POWER9 OCC through SBE" depends on FSI_OCC select SENSORS_OCC help - This option enables support for monitoring sensors provided by the - On-Chip Controller (OCC) on a POWER9 processor. Communications with - the OCC are established through SBE fifo on an FSI bus. + This option enables support for monitoring sensors provided by the + On-Chip Controller (OCC) on a POWER9 processor. Communications with + the OCC are established through SBE fifo on an FSI bus. - This driver can also be built as a module. If so, the module will be - called occ-p9-hwmon. + This driver can also be built as a module. If so, the module will be + called occ-p9-hwmon. config SENSORS_OCC bool "POWER On-Chip Controller" -- 1.9.1
